[nightmarez]

I have an LT and in the manual, it says I can adjust the dwell (Purple) to 15. But after triple checking and setting it, it only goes to 9? I tried to set it at 11 which 11 pulls on the trigger and saving it. After that I checked it and it only blinks 9 times. So what is going on here?

[tonycon]

is the tournament lock off? if so make sure you are in the set up mode. check page 27 on how to modify the parameters. to set your dwell to 11 you would have 1 trigger pull when the "E" is lit and 1 trigger pull when the "G" is lit.

[nightmarez]

ahh there we go. I was confused and now it helped.

Thanks Big T!

[tonycon]

No prob...flashing lights suck! Lol

[Uziel Gal]

Yep, with the Etek boards, when adjusting any parameter, you have to set a value for multiples of tens, units, and tenths. Otherwise, the setting won't be accepted. Even values that can only have a unit value - the firing mode for instance - still requires zero values to be entered for multiples of tens and tenths.