[Jinx18]

just checked back and saw these posts. I am unfamiliar with the cyborg so any updates or errors please let me know. Like burning ogre said i think what I have posted is the RX and Eliminators post is for the 07? Again I dont know much about the cyborg. thanks

[happy Ron]

can someone point where exactly to put quad orings on a drone dx? thanx in advance

[vern26]

Is the asa knob oring on the GT an 005 or an 006? I saw 006 in the specs above but the one that came off mine seemed to be on 005 on the oring chart.
Probably because my old eyes can't distinguish the 1/32" difference. Just want to be sure to replace with correct size

[Mark S.]

Originally Posted by vern26

Is the asa knob oring on the GT an 005 or an 006? I saw 006 in the specs above but the one that came off mine seemed to be on 005 on the oring chart.
Probably because my old eyes can't distinguish the 1/32" difference. Just want to be sure to replace with correct size

The o-ring on the GT's ASA knob is an 006.

[acabello72]

Originally Posted by happy Ron

can someone point where exactly to put quad orings on a drone dx? thanx in advance

016's on the bolt. 014 (I believe) valve. 017 bolt keg inner

[Worldofpaintball]

Can someone fill me in on hand fitting the orings? I watched pootys video on fitting orings on a luxe and how they should grab etc. does anyone have a video on fitting them?

[tech1151]

What a great post. Many thanks.

[David32270]

Question know that this been test and re test what oring sholud you Guys recomend to change for vitons on the GT?

[SHOOTNPOO]

Both power tube orings
Bolt switch oring
3 valve orings

Change all these to vitons.