Originally Posted by apstephens97
I got a ninja 68/45 last summer now the pin that lets the air out sticks and lets some air out till i push it in again its like when it gets unscrewed slow it sticks. Like in a screw in on/ off as opposed to a pops or raps. I already tried lubing the bonnet pin assembly but it did it again so I'm wondering if this is just an annoyance I'll have to deal with or if there's a fix.
You lubed the bonnet pin assembly?
Why told you to do that? You dont put lube there.
What you need to look at is the white teflon oring that sits on the inside of the top part of the bonnet. After you degas your bottle, remove bonnet, pull out piston, remove small white oring in the pocket on the inside of the top half of the bonnet, clean pocket with cotton swab, clean off the small white teflon oring, wipe off the brass pin valve (pin that sticks out the top of your reg), reassemble the regulator and try that. I have a feeling if you have never opened your regulator to clean it, its probably time.