[Rob @ Ninja PB]

Originally Posted by JBROWN90

so running it stock about 800 can make it starv for air? or are you talking about going lower then 500.

I never mentioned that 800 would make it starve for air. I'm not sure where you're getting that from.

Please give me a call at 877-646-5287 for additional help.

[SNAKESNIPER (Banned)]

Can I run SLP on an Axe? I know the recommended PSI is at 500-550, which is what I'm at now (2 red shims removed). How low can I run the tank reg and still be consistent running 120-160psi on the Axe ASA? I usually get around 4-5 pods using my 50/4500, trying to see if I can stretch it a bit more.

[bronze]

I believe Rob will say that it' hit or miss with SLP and AXE. Some people can get away with it, and others can't. 500psi-600psi output is where axes are happy at.

[General Cole]

You remember that I'm a ginger too right? Haha

[Rob @ Ninja PB]

Originally Posted by SNAKESNIPER

Can I run SLP on an Axe? I know the recommended PSI is at 500-550, which is what I'm at now (2 red shims removed). How low can I run the tank reg and still be consistent running 120-160psi on the Axe ASA? I usually get around 4-5 pods using my 50/4500, trying to see if I can stretch it a bit more.

Bronze speaks the truth. We recommend 500-550psi. Some players have been able to run them on lp or even slp but its very hit or miss, especially with the slp. At 500-550psi, your Axe should work just fine, no matter what upgrades or board settings you use. Once you get below around 300-400psi in your tank, you may start to experience drop off or inconsistent shots.

[Rob @ Ninja PB]

Originally Posted by General Cole

You remember that I'm a ginger too right? Haha

Yea, but I dont have to worry about you. Its that Shannon ginger girl thats trouble! haha!

[General Cole]

Haha, I'll make sure someone keeps her on track.

[rsnhm]

ok so at the risk of sounding like a complete idiot im just going to ask my question. i recently bought a ccm s6.5 and i shot it the other day w my ninja 68/4500 tank no problems. i then received my ninja black pearl 50/4500 tank and as soon as i screwed it onto the 6.5 it started leaking. i screwed the 68/4500 back on and no problems again..
i inspected the o-rings and they seem fine.. a friend suggested that the threads were shorter on the 50 than on the 68? i guess i'm just looking for some ideas on what could be going on.. im no expert on hpa tanks or anything.. clearly. so any help would be greatly appreciated

[bronze]

Naw no dumb question. Positive place here.

was it leaking from the ASA, and where exactly? Was both tanks full at the time?

[rsnhm]

neither tank was full. my 50 the one that was leaking is empty now.. but only leaked all the air after i screwed it into the gun. the 68 is still at 2k. im not exactly sure where it was leaking from like it almost seemed like it was going through the gun and leaking out the barrel.. but that doesnt really make sense since it only did that w the 50?

[bronze]

Is the 50 was under 500psi or so, then it may not of had enough pressure in the tank to keep the valve closed. Im no expert on cockers, but i would try filling the 50ci again, atleast past 1000psi, and give it another go

[Rob @ Ninja PB]

Originally Posted by bronze

Is the 50 was under 500psi or so, then it may not of had enough pressure in the tank to keep the valve closed. Im no expert on cockers, but i would try filling the 50ci again, atleast past 1000psi, and give it another go

good suggestion. rsnhm, did you adjust the pressure in the 50ci tank or do you know how many shims and which color are inside if its an adjustable reg?

btw - those s6.5's are NICE! one of my favorite pumps

[skra27]

Whats the best pressure for an ego11. Right now i have the adjustable with red schims out i belive thats 550. Ive heard to use a slp but didnt know if that was the best. What is the best pressure to run the ego11 at and what reg should i purshace?

[General Cole]

You can POTENTIALLY run an SLP. That is how we found the gun to be smoothest and what not. But if depending on your settings or location, a regular mid pressure would work fine.

[skra27]

Originally Posted by General Cole

You can POTENTIALLY run an SLP. That is how we found the gun to be smoothest and what not. But if depending on your settings or location, a regular mid pressure would work fine.

im in illinois... should i stick with my reg or get the slp... i will be at nppl Sunday so i can stop by the ninja booth.

[Rob @ Ninja PB]

Originally Posted by skra27

im in illinois... should i stick with my reg or get the slp... i will be at nppl Sunday so i can stop by the ninja booth.

We do not recommend using the SLP on anything other than a Bob Long G6R or Victory. With that being said, you may or may not be able to get your marker to run off an SLP reg.

So, instead of taking the chance of your marker not working, we recommend 550psi mid pressure. At that pressure, the ego 11 will cycle and chrono correctly, no matter what board settings or upgrades you use.

[cfl mike]

Mr. Ninja, got another question, the tanks that are still selling with the UL regs, on places like ANS for instance, are the bottles they come with made by Luxfer? Are you still making those or is that just left over stock?

[Rob @ Ninja PB]

Originally Posted by cfl mike

Mr. Ninja, got another question, the tanks that are still selling with the UL regs, on places like ANS for instance, are the bottles they come with made by Luxfer? Are you still making those or is that just left over stock?

must be leftover stock. We haven't had a bottle made by Luxfer in a long time. Might want to check the born on date of the bottle and also see if its been re-hydro tested yet

[510waffles]

Originally Posted by Rob @ Ninja PB

Yes, please call us so we can get the lot# off of your regulator and send you the replacement pin. 877-646-5287. Anyone that answers can help you out.

I got my replacement pin amazingly fast! now if only you guys can send me 4000 pounds of air so i can actually try it.....

[Desperado_Ghost]

Is it true that the pro reg pin is too short for the g6r? I just bought a brand new ninja tank from swap my tank, in fact it was one of the limited edition emerald tanks.

[Rob @ Ninja PB]

Originally Posted by Desperado_Ghost

Is it true that the pro reg pin is too short for the g6r? I just bought a brand new ninja tank from swap my tank, in fact it was one of the limited edition emerald tanks.

No, only the very first batch of regs had the shorter pins. you will be fine.