Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Closed Thread
 
Thread Tools
Old 03-04-2012, 02:51 PM #400
kevmeistah21
 
 
Join Date: Dec 2005
Location: CA
kevmeistah21 owns a Planet Eclipse Ego
kevmeistah21 plays in the APPA D5 division
kevmeistah21 has achieved Level 1 in PbNation Pursuit
kevmeistah21 has perfected Level 1 in PbNation Pursuit
Quote:
Originally Posted by xXxM4A1xXx View Post
Bleed Hole? you mean the top or the burst is starting to leak, if its the top sounds like its time for a cleaning , if its coming out one of the burst disk, is possbile either needs a cleaning if its coming out the 1.8k or if its the 7.5k possible faluty disk wish i doubt but clean the reg either way see if that fixes if not check the burst disks

It's leaking from this hole. What could be my problem, do i need a new reg?

kevmeistah21 is offline  
Old 03-04-2012, 07:56 PM #401
xXxM4A1xXx
Im Behind You... Pop
 
xXxM4A1xXx's Avatar
 
Join Date: Aug 2010
Location: Joliet
xXxM4A1xXx is BST Trusted
xXxM4A1xXx is playing at Living Legends V
xXxM4A1xXx posts videos on PbNation
xXxM4A1xXx has perfected Level 1 in PbNation Pursuit
xXxM4A1xXx has perfected Level 2 in PbNation Pursuit
xXxM4A1xXx has achieved Level 3 in PbNation Pursuit
i had this problem before but it was on a myth reg, i never did find out what it was i just replaced the whole reg and never had an issue after that, even my current ninja reg dont have that hole
__________________
SaintS Scenario Paintball - Chicago style paintball since 1994

Sponsored By:
Paintball Explosion --- Killjoy Industries --- Flurry Industries

The SaintS Proudly Shoot Markers Manufactured By:
Tippmann --- Tiberius Arms
xXxM4A1xXx is offline  
Old 03-04-2012, 10:03 PM #402
kevmeistah21
 
 
Join Date: Dec 2005
Location: CA
kevmeistah21 owns a Planet Eclipse Ego
kevmeistah21 plays in the APPA D5 division
kevmeistah21 has achieved Level 1 in PbNation Pursuit
kevmeistah21 has perfected Level 1 in PbNation Pursuit
okay cool, i'll just get a new reg to be safe.. Thanks alot!
kevmeistah21 is offline  
Old 03-04-2012, 11:45 PM #403
xXxM4A1xXx
Im Behind You... Pop
 
xXxM4A1xXx's Avatar
 
Join Date: Aug 2010
Location: Joliet
xXxM4A1xXx is BST Trusted
xXxM4A1xXx is playing at Living Legends V
xXxM4A1xXx posts videos on PbNation
xXxM4A1xXx has perfected Level 1 in PbNation Pursuit
xXxM4A1xXx has perfected Level 2 in PbNation Pursuit
xXxM4A1xXx has achieved Level 3 in PbNation Pursuit
Quote:
Originally Posted by kevmeistah21 View Post
okay cool, i'll just get a new reg to be safe.. Thanks alot!
yeah i wish i knew what it was truthfully but its good timing , maybe get a new pro reg from ninja
__________________
SaintS Scenario Paintball - Chicago style paintball since 1994

Sponsored By:
Paintball Explosion --- Killjoy Industries --- Flurry Industries

The SaintS Proudly Shoot Markers Manufactured By:
Tippmann --- Tiberius Arms
xXxM4A1xXx is offline  
Old 03-05-2012, 12:05 AM #404
sphynx
Scuba
 
sphynx's Avatar
 
Join Date: Aug 2003
Location: Medford, Oregon
 has been a member for 10 years
sphynx posts videos on PbNation
sphynx has achieved Level 3 in PbNation Pursuit
sphynx supports DLX Technology
The Pro reg is going to be the last reg I will ever need to buy Very excited about it!
sphynx is offline  
Old 03-05-2012, 05:27 AM #405
Counterfeit_Syn5304
1uP
 
Counterfeit_Syn5304's Avatar
 
Join Date: Jul 2004
Location: Wiscompton - UDubDub
Annual Supporting Member
Counterfeit_Syn5304 owns a Planet Eclipse Ego
Counterfeit_Syn5304 supports Pev's Paintball
Counterfeit_Syn5304 plays in the APPA D5 division
Counterfeit_Syn5304 is Legendary
Counterfeit_Syn5304 supports Empire
I know this is probably a stupid question but I want to make sure that nobody makes this mistake.....So my friend hands me a steelie 47/3k tank but it has a ninja reg that says 4500psi on it. Is this the same reg that could be used on (lets say a 68/45 hpa tank?) I just wanted to make sure before someone tries to put a 3k tank reg on a 68/45 bottle and something blows up.



__________________
Counterfeit_Syn5304 is offline  
Old 03-05-2012, 08:19 AM #406
Rob @ Ninja PB
 
 
Rob @ Ninja PB's Avatar
 
Join Date: Sep 2010
Location: Chicago, IL
Rob @ Ninja PB works for a Paintball manufacturer
Rob @ Ninja PB owns a Planet Eclipse Ego
Rob @ Ninja PB supports Team VICIOUS
Rob @ Ninja PB supports our troops
Looks like someone put a 4.5k reg on a 3k bottle. We do not recommend players do this because of possible overfilling issues.
__________________
http://www.ninjapaintball.com
http://www.facebook.com/ninjapaintball
NINJA IS PROUDLY MADE IN THE USA - NOT CHINA
Certfied Hydro Test Facility - DOT RIN# G777
NINJA USERS CLUB
Rob @ Ninja PB is offline  
Old 03-05-2012, 08:22 AM #407
Rob @ Ninja PB
 
 
Rob @ Ninja PB's Avatar
 
Join Date: Sep 2010
Location: Chicago, IL
Rob @ Ninja PB works for a Paintball manufacturer
Rob @ Ninja PB owns a Planet Eclipse Ego
Rob @ Ninja PB supports Team VICIOUS
Rob @ Ninja PB supports our troops
Quote:
Originally Posted by sphynx View Post
The Pro reg is going to be the last reg I will ever need to buy Very excited about it!
Hit corey or jj up if you play for thunders feeder team. They can get one for you
__________________
http://www.ninjapaintball.com
http://www.facebook.com/ninjapaintball
NINJA IS PROUDLY MADE IN THE USA - NOT CHINA
Certfied Hydro Test Facility - DOT RIN# G777
NINJA USERS CLUB
Rob @ Ninja PB is offline  
Old 03-05-2012, 08:46 AM #408
SaltyWarDog
 
 
SaltyWarDog's Avatar
 
Join Date: Feb 2012
Location: Jacksonville FL
SaltyWarDog has perfected Level 1 in PbNation Pursuit
SaltyWarDog has achieved Level 2 in PbNation Pursuit
Whats the stock output pressure of a 50/4500
__________________
USMC Commanding
SaltyWarDog is offline  
Old 03-05-2012, 09:29 AM #409
xXxM4A1xXx
Im Behind You... Pop
 
xXxM4A1xXx's Avatar
 
Join Date: Aug 2010
Location: Joliet
xXxM4A1xXx is BST Trusted
xXxM4A1xXx is playing at Living Legends V
xXxM4A1xXx posts videos on PbNation
xXxM4A1xXx has perfected Level 1 in PbNation Pursuit
xXxM4A1xXx has perfected Level 2 in PbNation Pursuit
xXxM4A1xXx has achieved Level 3 in PbNation Pursuit
Quote:
Originally Posted by SaltyWarDog View Post
Whats the stock output pressure of a 50/4500
depends on the reg that is on it a stock ninja regulator has an output of 800-850 but they can be brought down to 400-500
__________________
SaintS Scenario Paintball - Chicago style paintball since 1994

Sponsored By:
Paintball Explosion --- Killjoy Industries --- Flurry Industries

The SaintS Proudly Shoot Markers Manufactured By:
Tippmann --- Tiberius Arms
xXxM4A1xXx is offline  
Old 03-05-2012, 10:15 AM #410
SaltyWarDog
 
 
SaltyWarDog's Avatar
 
Join Date: Feb 2012
Location: Jacksonville FL
SaltyWarDog has perfected Level 1 in PbNation Pursuit
SaltyWarDog has achieved Level 2 in PbNation Pursuit
yep stock from 2009, thanks
__________________
USMC Commanding
SaltyWarDog is offline  
Old 03-05-2012, 10:46 AM #411
Rob @ Ninja PB
 
 
Rob @ Ninja PB's Avatar
 
Join Date: Sep 2010
Location: Chicago, IL
Rob @ Ninja PB works for a Paintball manufacturer
Rob @ Ninja PB owns a Planet Eclipse Ego
Rob @ Ninja PB supports Team VICIOUS
Rob @ Ninja PB supports our troops
Quote:
Originally Posted by xXxM4A1xXx View Post
depends on the reg that is on it a stock ninja regulator has an output of 800-850 but they can be brought down to 400-500
correct info Lower end of the adjustable is more around the 450-500psi range. Its rare we see them get down to around 400psi unless the coil spring has been stressed a little.
__________________
http://www.ninjapaintball.com
http://www.facebook.com/ninjapaintball
NINJA IS PROUDLY MADE IN THE USA - NOT CHINA
Certfied Hydro Test Facility - DOT RIN# G777
NINJA USERS CLUB
Rob @ Ninja PB is offline  
Old 03-05-2012, 10:47 AM #412
Rob @ Ninja PB
 
 
Rob @ Ninja PB's Avatar
 
Join Date: Sep 2010
Location: Chicago, IL
Rob @ Ninja PB works for a Paintball manufacturer
Rob @ Ninja PB owns a Planet Eclipse Ego
Rob @ Ninja PB supports Team VICIOUS
Rob @ Ninja PB supports our troops
Quote:
Originally Posted by kevmeistah21 View Post
It's leaking from this hole. What could be my problem, do i need a new reg?

If its leaking from that hole, your regulator most likely needs a good cleaning/re-lube or possibly a rebuild.
__________________
http://www.ninjapaintball.com
http://www.facebook.com/ninjapaintball
NINJA IS PROUDLY MADE IN THE USA - NOT CHINA
Certfied Hydro Test Facility - DOT RIN# G777
NINJA USERS CLUB
Rob @ Ninja PB is offline  
Old 03-05-2012, 12:18 PM #413
sphynx
Scuba
 
sphynx's Avatar
 
Join Date: Aug 2003
Location: Medford, Oregon
 has been a member for 10 years
sphynx posts videos on PbNation
sphynx has achieved Level 3 in PbNation Pursuit
sphynx supports DLX Technology
Quote:
Originally Posted by Rob @ Ninja PB View Post
Hit corey or jj up if you play for thunders feeder team. They can get one for you
Awesome. Will give Corey a call later this week. Have a good day Rob.
sphynx is offline  
Old 03-05-2012, 01:24 PM #414
Rob @ Ninja PB
 
 
Rob @ Ninja PB's Avatar
 
Join Date: Sep 2010
Location: Chicago, IL
Rob @ Ninja PB works for a Paintball manufacturer
Rob @ Ninja PB owns a Planet Eclipse Ego
Rob @ Ninja PB supports Team VICIOUS
Rob @ Ninja PB supports our troops
Quote:
Originally Posted by sphynx View Post
Awesome. Will give Corey a call later this week. Have a good day Rob.
anytime Good luck this season! I'm looking forward to seeing how the ninja regs work out for corey and the boys this season. they all switched over to ninja this year
__________________
http://www.ninjapaintball.com
http://www.facebook.com/ninjapaintball
NINJA IS PROUDLY MADE IN THE USA - NOT CHINA
Certfied Hydro Test Facility - DOT RIN# G777
NINJA USERS CLUB
Rob @ Ninja PB is offline  
Old 03-05-2012, 01:52 PM #415
sphynx
Scuba
 
sphynx's Avatar
 
Join Date: Aug 2003
Location: Medford, Oregon
 has been a member for 10 years
sphynx posts videos on PbNation
sphynx has achieved Level 3 in PbNation Pursuit
sphynx supports DLX Technology
We are very excited for this season and using Ninja. Been grinding hard. Will see this weekend how Texas goes! Oh, and i'm sure the reg will work out great!!!
sphynx is offline  
Old 03-05-2012, 09:46 PM #416
xXxM4A1xXx
Im Behind You... Pop
 
xXxM4A1xXx's Avatar
 
Join Date: Aug 2010
Location: Joliet
xXxM4A1xXx is BST Trusted
xXxM4A1xXx is playing at Living Legends V
xXxM4A1xXx posts videos on PbNation
xXxM4A1xXx has perfected Level 1 in PbNation Pursuit
xXxM4A1xXx has perfected Level 2 in PbNation Pursuit
xXxM4A1xXx has achieved Level 3 in PbNation Pursuit
Quote:
Originally Posted by Rob @ Ninja PB View Post
correct info Lower end of the adjustable is more around the 450-500psi range. Its rare we see them get down to around 400psi unless the coil spring has been stressed a little.
dam i was close i forgot if it was 400 or 450 but anywhos rob, got the reg rebuilt and no problems thanks for the advice and cant wait for my next ninja purchase
__________________
SaintS Scenario Paintball - Chicago style paintball since 1994

Sponsored By:
Paintball Explosion --- Killjoy Industries --- Flurry Industries

The SaintS Proudly Shoot Markers Manufactured By:
Tippmann --- Tiberius Arms
xXxM4A1xXx is offline  
Old 03-06-2012, 12:07 AM #417
i8somepie
Michael Pasztor
 
i8somepie's Avatar
 
Join Date: Apr 2011
Location: AK, Ohio
Annual Supporting Member
i8somepie is an NCPA player
i8somepie plays in the APPA D5 division
Hey Ninja guys! Hope all is good.

Anyways, I have my adjustable with no shims in it currently outputting at ~425psi.

I just picked up an Axe though. Which shim(s) do I put back in to boost it up to 550ish?
__________________
University of Akron Paintball

Underground Sports - Underground Army
The Best DYE dealer in NE Ohio

YetiPB.com - The only place you'll ever need, ever
i8somepie is offline  
Old 03-06-2012, 08:12 AM #418
xXxM4A1xXx
Im Behind You... Pop
 
xXxM4A1xXx's Avatar
 
Join Date: Aug 2010
Location: Joliet
xXxM4A1xXx is BST Trusted
xXxM4A1xXx is playing at Living Legends V
xXxM4A1xXx posts videos on PbNation
xXxM4A1xXx has perfected Level 1 in PbNation Pursuit
xXxM4A1xXx has perfected Level 2 in PbNation Pursuit
xXxM4A1xXx has achieved Level 3 in PbNation Pursuit
Quote:
Originally Posted by i8somepie View Post
Hey Ninja guys! Hope all is good.

Anyways, I have my adjustable with no shims in it currently outputting at ~425psi.

I just picked up an Axe though. Which shim(s) do I put back in to boost it up to 550ish?


basiclly 2 sliver shims stay in the reg
__________________
SaintS Scenario Paintball - Chicago style paintball since 1994

Sponsored By:
Paintball Explosion --- Killjoy Industries --- Flurry Industries

The SaintS Proudly Shoot Markers Manufactured By:
Tippmann --- Tiberius Arms
xXxM4A1xXx is offline  
Old 03-06-2012, 08:13 AM #419
i8somepie
Michael Pasztor
 
i8somepie's Avatar
 
Join Date: Apr 2011
Location: AK, Ohio
Annual Supporting Member
i8somepie is an NCPA player
i8somepie plays in the APPA D5 division
Quote:
Originally Posted by xXxM4A1xXx

Video Link: http://www.youtube.com/watch?v=SDmMxozCPaU

basiclly 2 sliver shims stay in the reg
Thanks! It's been awhile since I dropped my pressure.
__________________
University of Akron Paintball

Underground Sports - Underground Army
The Best DYE dealer in NE Ohio

YetiPB.com - The only place you'll ever need, ever
i8somepie is offline  
Old 03-06-2012, 12:00 PM #420
Rob @ Ninja PB
 
 
Rob @ Ninja PB's Avatar
 
Join Date: Sep 2010
Location: Chicago, IL
Rob @ Ninja PB works for a Paintball manufacturer
Rob @ Ninja PB owns a Planet Eclipse Ego
Rob @ Ninja PB supports Team VICIOUS
Rob @ Ninja PB supports our troops
Quote:
Originally Posted by i8somepie View Post
Hey Ninja guys! Hope all is good.

Anyways, I have my adjustable with no shims in it currently outputting at ~425psi.

I just picked up an Axe though. Which shim(s) do I put back in to boost it up to 550ish?
If you're down that low, add one silver shim back in and that would raise it up roughly 50psi. Seems like the axe likes about 500-550psi. If you can't chrono over a certain velocity and you need it raised, add another silver shim (total of 2 inside) or if you dont have another silver shim, add one red only. That should get you up to about 600psi roughly...still fine on the Axe or Minis.
__________________
http://www.ninjapaintball.com
http://www.facebook.com/ninjapaintball
NINJA IS PROUDLY MADE IN THE USA - NOT CHINA
Certfied Hydro Test Facility - DOT RIN# G777
NINJA USERS CLUB
Rob @ Ninja PB is offline  
Closed Thread


Thread Tools

Posting Rules
Forum Jump