Demon issues..

Zconley (Banned) · 12-29-2011, 09:54 AM

Hey guys just got a 1 of 1 vanguard demon in a trade. Im pretty sure it has the v2 parts, and im having some issues with it. The main concern i have is that the screen is not working. I can faintly see the words on the screen, but it is not lit up and the battery has a full charge. Also there is a crease in between the frame and body on the left side of the gun, maybe this is normal but im not sure. If you guys have any advice on what to do let me know.

Zconley (Banned) · 12-29-2011, 10:16 AM

i have a tournament tonight so any help would be appreciated!!!!

SHOOTNPOO · 12-29-2011, 10:28 AM

The Grease on the Left side of the body is fine. That is the Exhaust for the QEV and if grease is to come out no bigdeal it will stop after you get some paint through it.
As for the screen you nay need to unplug the battery for 10-15 min to reset the board and see if that helps out. If that dosnt work you may need to purchase a New board.

I saw you called the office and was going to return your call here in a little bit then I saw your post.

Eric

Zconley (Banned) · 12-29-2011, 10:34 AM

eric can you call me back please i have some questions

overweightangel275 · 12-29-2011, 06:58 PM

Did you get all sorted out?

SHOOTNPOO · 12-29-2011, 07:14 PM

Yes we did

Zconley (Banned) · 12-31-2011, 09:56 AM

Quote:

Originally Posted by overweightangel275

Did you get all sorted out?

not totally, the problems still occuring.

SHOOTNPOO · 12-31-2011, 01:17 PM

As i explaned if the board is not reading on the OLED then the issue is something is wrong with the board. It will need to be replaced.