Originally Posted by Cnoddings0364
This is honestly my only complaint about the NT. Debating buying a 2nd NT11, I'm trying to see if they would send me one with the entire bolt assembly, disassembled. So I could put it together myself. I have no idea why they make the bolt near impossible to get apart w/o doing physical damage to the rod and/or plunger. It's like the have the Hulk there putting these things together. Pisses me off... /rant
I have realized that it's not a good idea to use an adjustable wrench when taking apart the spool (wings on the plunger and rod). I use fixed size wrenches. They seem to hold better and don't twist off if there is to much force on them. Once you do get the spool apart, I suggest putting a very small amount of lube on that small Orange oring. That will help with future tear downs.
I can't help you with the trigger screws unfortunately. I have only had to adjust the stock trigger on the NT once. It was a little sloppy. But just make sure you don't strip or cross thread those screws.
Hope this helps.
On the trigger screws, you can try to apply some heat to them with a torch. The heat will crack/melt the threadlocking glue. Whatever you do, go very easy with those screws because they strip VERY easily(please Dye no more so cheap screws on a thousand dollar gun) - and once they strip then you really have a problem.
chipp: god, small torch, small amounts of heat each time, ok?