Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 10-06-2011, 01:17 AM #1
Dawscaus
Killin For The Razorbacks
 
Dawscaus's Avatar
 
Join Date: Oct 2007
Location: Camden, AR
Dawscaus is an NCPA player
Dawscaus plays in the APPA D4 division
Leaking from the solenoid/manifold

I just recently bought an NT 2010 on here. This gun has been through the ringer and I was unaware of it which is a whole separate deal.

However my real concern right now is the fact that I have a leak in the manifold/solenoid and I can not get it to stop. I am at 3 turns on the HPR so the pressure should not be an issue. Is this a common problem and what is the fix?

I only want to replace the solenoid as a last resort.
__________________
University of Arkansas Paintball
Sponsored by: B&E Paintball Supplies, JT Sports, Viewloader, Wild World Paintball
1 of 50 Bob Long Marq Edge
Dawscaus is offline   Reply With Quote
Old 10-06-2011, 06:16 AM #2
MurderFX
 
 
MurderFX's Avatar
 
Join Date: Oct 2007
Location: Cincinnati, OH
It's probably one of the 2 green o-rings on the plunger or one of the o-rings on the spool.
__________________
Kevin
~ owner & driver of cars ~

Oklahoma D-Day 2012 - German Army - Join the fun
MurderFX is offline   Reply With Quote
Old 10-06-2011, 11:14 AM #3
Dawscaus
Killin For The Razorbacks
 
Dawscaus's Avatar
 
Join Date: Oct 2007
Location: Camden, AR
Dawscaus is an NCPA player
Dawscaus plays in the APPA D4 division
Quote:
Originally Posted by MurderFX View Post
It's probably one of the 2 green o-rings on the plunger or one of the o-rings on the spool.
The leak is under the manifold/solenoid will the above mentioned orings cause that?
__________________
University of Arkansas Paintball
Sponsored by: B&E Paintball Supplies, JT Sports, Viewloader, Wild World Paintball
1 of 50 Bob Long Marq Edge
Dawscaus is offline   Reply With Quote
Old 10-06-2011, 12:51 PM #4
MurderFX
 
 
MurderFX's Avatar
 
Join Date: Oct 2007
Location: Cincinnati, OH
Quote:
Originally Posted by Dawscaus View Post
The leak is under the manifold/solenoid will the above mentioned orings cause that?
Yes.
__________________
Kevin
~ owner & driver of cars ~

Oklahoma D-Day 2012 - German Army - Join the fun
MurderFX is offline   Reply With Quote
Old 10-07-2011, 01:28 AM #5
Dawscaus
Killin For The Razorbacks
 
Dawscaus's Avatar
 
Join Date: Oct 2007
Location: Camden, AR
Dawscaus is an NCPA player
Dawscaus plays in the APPA D4 division
replaced them all the orings on the bolt and the problem still persists. seems like it is coming out of the back part of the noid on the bottom I am guessing where the noid gasket meets up with the manifold. I am thinking about using the stuff that makes a gasket to try to get it to seal.
__________________
University of Arkansas Paintball
Sponsored by: B&E Paintball Supplies, JT Sports, Viewloader, Wild World Paintball
1 of 50 Bob Long Marq Edge
Dawscaus is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump