I have an unamed body,unknown valve.Hammer Spring is Red.Pressure is 300.
IVG is flush
Cocking Rod is set to cock and leave about an 1/8 of space so the rear lug doesnt damage the slot.Noid releases the lug at about 50% of the noids throw.
Shocktech LPR and Ram .
Yak is stock settings.
1.With the stock Eblade it cycles fine once I have the LPR Adjusted.
Once swapped to to the Yak Board
2.It acts like the LPR is low and has issues cocking consistently.
Click Hereto add me on Facebook!
Sounds like the Yak Board isn't powering the solenoid long enough for it to let the ram completely cock the gun. Not sure if/how, but can you adjust the time/dwell the solenoid is activated? Sorry I don't know more about the Yak Board, but the problem sounds like it must be with that since the gun operates normally with a stock board.