[erikguti]

hi, i have a guerrilla tank, i cant air up the Demon with the guerrilla regulator, also i put my macdev extender in the guerrilla and it wont air up, i try a ninja reg in my tank and it air up, i dont understand why it dont work with the guerrilla reg... is that normal in your demon or maybe i have a bad ASA PIN... thanks

[SHOOTNPOO]

We have pleanty of teams shooting demons with GA tanks with no issues.
Prolly just your tank.

We have now did alot.of tests with the new SmP 550 reg from ninja anhave seen great things from this reg. If you are planing on buying new reg.i would recommend these regs.

[erikguti]

Originally Posted by SHOOTNPOO

We have pleanty of teams shooting demons with GA tanks with no issues.
Prolly just your tank.

We have now did alot.of tests with the new SmP 550 reg from ninja anhave seen great things from this reg. If you are planing on buying new reg.i would recommend these regs.

hey thanks for all the help you give me By personal message, you have a great customer service thanks

[Swanie08]

Originally Posted by SHOOTNPOO

Prolly just your tank.

Haha, he said "Prolly."

[FightingOriole]

Ben he said great customer service, not spelling

[erikguti]

Hey just an update in my problem with the Vanguard Demon

i went to the field with 4 tanks regulators i have, 2 guerrillas and 2 ninja. Also with 2 macdev extenders to see if i can solve my problem.

First of all the maker didnt air up with neither of the guerrillas regulators, i then try the 2 guerrilla regulatos with the macdev extenders in the Guerrillas reg and the Demon didnt air up. After that i try my 2 ninja tanks, both of them air up the Demon but i hear like if the air dont have enough power going inside the maker, it was so quiet that you have to put your ear close to the asa to hear the air going inside the maker.

After that before shooting i put my 2 macdev extender in my 2 ninja reg, the results was that they didnt air up just like the guerrilas. Then i took 3 tanks from different players of my local field, the 2 guerrillas didnt air up the maker, and the ninja was the same results as my ninjas reg. So after this i start thinking that maybe are not my regulators.

Test shooting with the Demon.
I put the ninjas regulators without the macdev extender, and start shooting with the maker. First shot was ok no problem, then when the Ramp start it makes a Drop off but when i stop shooting for 1 second or 2 the maker charge again and i shot it 1 shot by 1 shot (not Ramping) the maker dont make a drop off.

i will try today to put something between the macdev extender and the pin of the asa (plastic or metal) and then try to shoot 12 bps to see if it makes drop off (i made yesturday some test with the plastic part and the metal part) and the regulators charge with more power the maker (i can hear like a normal air charge when i air up the maker) i will post tonight the results of my test.

[dyepaint17]

Dear god the GRAMMAR!!!

[SHOOTNPOO]

If you are still seeing recharge issues then we will need you to send the marker into us to look at the ASA.
please contact customer service to set up for the RMA.
customerservice@vanguardus.com

Thanks
Eric

[Swanie08]

Originally Posted by FightingOriole

Ben he said great customer service, not spelling

Oh I know, I'm just being dumb I've had excellent customer service getting my V1 Creed up and performing like a boss

[Reaper (ACI)]

Try unscrewing the ASA knob a bit. Funny thing with the Guerrilla Tank is that you can screw the ASA pin/o-ring directly into the opening of the regulator and choke off the air flow. Back it out a bit.

Also, if that doesn't work, check your regulator on the marker and make sure you don't have it "closed" preventing air from getting beyond the regulator.

[dmented-predator]

Originally Posted by dyepaint17

Dear god the GRAMMAR!!!

English is not his first language.

[erikguti]

Originally Posted by dmented-predator

English is not his first language.

LoL thanks Broooo

[MstrKey]

Ya it sounds like the pin on the regs is too short for the asa.

[erikguti]

Originally Posted by Reaper (ACI)

Try unscrewing the ASA knob a bit. Funny thing with the Guerrilla Tank is that you can screw the ASA pin/o-ring directly into the opening of the regulator and choke off the air flow. Back it out a bit.

Also, if that doesn't work, check your regulator on the marker and make sure you don't have it "closed" preventing air from getting beyond the regulator.

Thanks bro but the maker didnt even air up but thanks for the help

Originally Posted by MstrKey

Ya it sounds like the pin on the regs is too short for the asa.

yeah i think it was like this, i sent my ASA to them, waiting for them to send me a new ASA.

thanks !!

[erikguti]

Hey, just to say thanks to SHOOTNPOO and the people of Vanguard, i receive the new ASA, This ASA is air up with all my Regulators and regulator extenders. I will shoot it this weekend and let you guys know what i think of the DEMON. thanks