[KMD812]

I Was able to play with it before. I put a new battery in but it still wont turn on. I was told to check the wiring but I don't know what I'm looking for or what to do when I find something. Please help

[midnightdaylight]

is yours the UL frame or the Standard frame?

Dose yours have the metal tangs, or the rubber 9v snap connector?

[KMD812]

I believe its just the standard frame, and it has the metal tangs

[Tikiman12]

Make sure your Tabs are making good, strong contact with your battery. A piece of cardboard under the battery will help keep the battery pushed into the tabs.

Also check the board for any broken wires, or broken solder points.

[midnightdaylight]

it's a bit safer to put the cardboard between the frame and the tangs, so your not contently bending them...

Also raping a bit of thin string or fishing line under the batter will make it EZer to take the battery out.

Originally Posted by Tikiman12

Make sure your Tabs are making good, strong contact with your battery. A piece of cardboard under the battery will help keep the battery pushed into the tabs.

Also check the board for any broken wires, or broken solder points.