FSDO with Drone DX
Got a 2012 Drone DX with a GTI board and I'm having FSDO issue that I can't figure out.
If I let the gun sit for a little bit then go and fire, it will make a "puff" sound like the gun was low on air and moves the ball slightly forward. Fire a second time and it will shoot both the 1st and 2nd ball out.
From what I've gathered here, most likely problem is either improper lube, bad 016x2 bolt switch or 014 valve o-rings, or dead battery. I've relubed it a few times now, and still getting FSDO. Swapped the o-rings I mentioned and still have FSDO. I've replaced with a new battery and still didn't fix it. I've upped the dwell from 8ms to 10.5ms and still did not help either. Haven't messed with the FSDO setting, but it seems like it just adds X MS to my first shot, but if I up my Dwell regardless, it should fix it anyways right?
Is this a sign that my solenoid is going bad?
Also, I'd like to mention I just got this GTI board recently, but today for some reason, when I go to turn it on sometimes it doesn't turn on, but you can see a white LED flash for a sec as you press the power button. It just started doing that today.
I do have my old DX Board, will be giving that a shot to see if it's a problem with the board.
What else I can try to fix this issue?