what model frestyle is this?

K^2 · 10-27-2011, 07:29 PM

what year and model is this? i know its not a f7 0r 8.

its like the 4th gun down

http://www.pbnation.com/showthread.php?t=3677550

maloneoni · 10-27-2011, 10:51 PM

It is a Naughty Dog Freestyle. It is based of the Gen2 Freestyle as I recall.

It looks like it has a Vaporworks S4 trigger too.

K^2 · 10-28-2011, 06:42 AM

Okay thank you. So is that around 05 then? What board does it most likely have? I think I heard the ND ones had a better board then regular ones

K^2 · 10-28-2011, 07:04 AM

also whats a fair price to pay for this? looks clean and has some ups.

zachsdad86 · 10-28-2011, 07:58 AM

120 is fair.

K^2 · 10-28-2011, 08:03 AM

Great. So does this model have the nox reloaded board and HE bolt?

Headshotted · 10-28-2011, 07:27 PM

Probably not. HE Bolts came in around 05. Gen2's were launched in late 04-early 05, He's came about late 05,/sliders in 06 in the NDFSP and FSPro, and the FS8 had the Slider 2.

Without HE - 800 shots on a 68/45. With He 1000 shots on a 68/45.

Give or take, but those are close approximation numbers. They're good markers, Don't get me wrong. Just gas hogs, as they are an older design based off the agd automag. Nox Reloaded can be a challenge to use, board wise. I would just ask him about it. Even without, I'd still say $120 is a fair price. For an FS8 or FS7 they run around $150-250, there's one for sale on ICDO, but some people don't like the newer/last run of freestyles. I personally love blue/black fade gen2's.

NFDSP's and NDFS7's have the HE bolt. Most likely not the gen2's. Even without nox, the gun will shoot reliably quickly, and with that trigger sweet spotting it will be easy, so nothing to fear there walking wise. That IS the stock barrel though, and they are bored exceptionally ****ing large, like .691 or something insane.

maloneoni · 10-28-2011, 09:18 PM

You can get an HE kit into a Gen2. I think some of the NDFSes came with HE.

Headshotted · 10-28-2011, 09:20 PM

It requires milling out the back block somewhat to my knowledge. THC's got information on it somewhere. The only way to know for sure is to have him crack it open.

K^2 · 10-28-2011, 09:23 PM

well when i get it ill be sure to post up some pics of the internals. ive had 2 bko's and a promaster so im familiar with icd guns just not freestyles

maloneoni · 10-28-2011, 10:11 PM

They cut the back deeper for more volume. I have pictures posted in the Freestyle sticky at ICDO. I believe the issue is there is not enough room in the back block for the spring. But if it came with a HE kit, it is not an issue.

skateandpaint · 11-04-2011, 01:57 PM

Ive shot a nd freestyle..it was just like shooting my 04 gen 2..i love my freestyle it never has done me wrong you just need to know how to tune them..gas hogs but shoot like a dream. i go to the field and it keeps up with egos and other high ends all the same

K^2 · 11-05-2011, 10:53 AM

awesome. ive recieved it and its in great condition, havent shot it yet tho

Headshotted · 11-05-2011, 09:35 PM

Learn how to balance it, and your life will be that much easier.