[T9Ranger4Life]

Get a freinds reflex i think?! Its got an led display if that means anything. The pics will show you where its leaking from, but its from the solenoid in between the solenoid itself and the metal piece covering the solenoid (no idea what it's called... im a noob with cockers) Tried lubing the gasket and bolt, but didnt wanna do anything that would screw up the gun.

Thinking of making it into a pump, but if there is anything i can do by myself, i would like to try.

Have no idea what to do with autocokers to begin with, so please help if you have any suggestions. Here are some pics for help.

Pics (kinda big):







Thanks again,
Kyle

[oneeighty7]

check your solenoid gasket isn't damaged and that the solenoid barbs are tight and sealed correctly. pipe thread tape or lock tight works well.

[T9Ranger4Life]

Gasket looks fine but where can I find the barbs?

[Darkapollo]

Originally Posted by T9Ranger4Life

Gasket looks fine but where can I find the barbs?

They are on top of the manifold? The 3 things that the hoses connect to?
Anyway, you are working with an E1 UltraLight, basically a mini-Reflex. Karnivor 3way manifold, CP reg.
It would be worth more stock then with the Eblade, at least its not drilled.

As for the leak, if its coming down between the solenoid and the manifold, then the gasket is either bad, or the solenoid isnt tightened down enough to create a seal.

[PeaTear_Griffin]

Check your LPR pressure and make sure the gasket is seated correctly.

[T9Ranger4Life]

Ok, ill check both thing when I get home. And darkapollo... I have what I believe to be the stock frame. Same color with dye on it... its a mech frame thro. If I get it working, how much would u think it to be worth?

And if I can't get it working, what pump conversion kit could I get to convert it?

Thanks

[Rebel_816]

definitely check the lpr pressure. if its the too the noid will just vent.

also check the ram oring. pull off the hose from the front of the ram, if air comes out then the ram oring is bad. it looks like a solenoid leak at first but its actually the air leaking past the ram and back out through the noid.

[Scatlm]

Hey quick question on the ASA. I have the same marker that I bought from my local shop. It's hard to believe that they still had this mini ultralite in their warehouse since 02-03 but they basically gave it away to me for $130 with the purchase of a Rotor and an E-vent.

Anyway, I was wondering how did you get the ASA all the way in; I cant screw mine in all the way and I don't want to take a wrench to it and strip anno off.

[T9Ranger4Life]

I have no idea... this is a friend's gun