i have a question - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 11-25-2001, 08:38 PM #1
MajSpyder
Wohhhhaaaaaaa
 
MajSpyder's Avatar
 
Join Date: Aug 2001
Location: Ottawa
 has been a member for 10 years
i have a question

most of you guys have done somethimg nice to your rm, its the front block (were u see the battery...)
U guy have just a small silver tube, but on my gun i have a big block with the mac, hires, the battery...
How can i have my gun like u guys?
__________________
evilEI inside
Mat Gagné #002
MajSpyder is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 11-25-2001, 11:15 PM #2
blackrain
 
 
blackrain's Avatar
 
Join Date: Nov 2001
Location: Belfair,Wa
blackrain is a founding member
 has been a member for 10 years
blackrain supports Bob Gurnsey
Here's what you do.

Go to http://rainmaker.flipty.com/here you will find all the places that do the mods and up grades.This gun is like the Tribal,not many people do up grades.Cut off the front of your ram.This will give you that "tube effect"your seeing.Cut it a little ways from the front.Then grind it flush with a dremal tool.Put a"Mac Mount"on it with an Auto mag Vert air.I use a Humphrey vale on mine and a gale Force board.If you want a list of places to buy parts,email me at: blackrain@web-o.net I'll send you my latest update list.It's also on the board.Hope this helps you out.Also go to the BEOG board http://pub101.ezboard.com/bbeog for more help on improvement and mods.
Later,
Blackrain
__________________
"When all else fails,pull the pin and see what's next!"

Last edited by blackrain : 11-25-2001 at 11:22 PM.
blackrain is offline  
Old 11-26-2001, 07:09 PM #3
MajSpyder
Wohhhhaaaaaaa
 
MajSpyder's Avatar
 
Join Date: Aug 2001
Location: Ottawa
 has been a member for 10 years
the link doesnt work?
__________________
evilEI inside
Mat Gagné #002
MajSpyder is offline  
Old 11-26-2001, 07:20 PM #4
blackrain
 
 
blackrain's Avatar
 
Join Date: Nov 2001
Location: Belfair,Wa
blackrain is a founding member
 has been a member for 10 years
blackrain supports Bob Gurnsey
Talking Which one?

The BEOG is woring,but sometimes the RMOG goes down.Email me if you have trouble and I'll send the page to you.
Later,
Blackrain
http://www.blackrain.freeservers.com
If you want to see pics of my rainmaker,it's not anodized yet,but it might be soon,it all depends how I feel.
__________________
"When all else fails,pull the pin and see what's next!"
blackrain is offline  
Old 11-26-2001, 07:20 PM #5
MajSpyder
Wohhhhaaaaaaa
 
MajSpyder's Avatar
 
Join Date: Aug 2001
Location: Ottawa
 has been a member for 10 years
k sure

my email is

mat.gagne@videotron.ca
__________________
evilEI inside
Mat Gagné #002
MajSpyder is offline  
Old 11-26-2001, 07:41 PM #6
ScottQ
lefty scissors
 
ScottQ's Avatar
 
Join Date: Feb 2001
Location: Eureka Springs
Annual Supporting Member
ScottQ is a Moderator
ScottQ is a Supporting Member
ScottQ is a founding member
ScottQ works for a Paintball manufacturer
ScottQ plays in the PSP
ScottQ supports Team VICIOUS
the RMOG is having some problems, I will have it up as soon as possible.
__________________
Empire - Empire BT - JT Paintball - JT SplatMaster - Spyder

Once in awhile you get shown the light, the strangest of places if you look at it right.
ScottQ is offline  
Old 11-26-2001, 11:10 PM #7
LokiOs
 
 
Join Date: Nov 2001
Location: California
 has been a member for 10 years
So you can grimd down the front of the ram. Is that just grinding the threads on the front? I dont want to do to much and mess something up, so I thought I would double check...
LokiOs is offline  
Old 11-27-2001, 01:26 AM #8
blackrain
 
 
blackrain's Avatar
 
Join Date: Nov 2001
Location: Belfair,Wa
blackrain is a founding member
 has been a member for 10 years
blackrain supports Bob Gurnsey
Thumbs up That's correct

What I did I cut right at the bottom of the hole.That gave me enough metal to work with.Then I used my dremal tool and slowly started to grind it
down.Once I had it flush or even,I wire wheeled it till it shined.Make sure you cover you exhaust holes with tape.You don't want to get any metal flakes in the holes.E mail me at: blackrain@web-o.net and I'll make you a drawing tomorrow and show you exactly were to make your first cut.If you feel you can't do it,I can do it for you at no charge.I live in Washington state.You can ask around about me at this forum,some people know me.I hang out at the BEOG alot and you can ask about me there as well.I have never ripped anyone of in the 14 yrs I've been playing.Here is my site if you want to check out my Rainmaker and what I've done to it.I bought it back from the dead,it wasn't even working when I got it a year ago.Now it sings and kicks alot of ***. http://www.blackrain.freeservers.com You can find out whatever you want about me here and the other places I told you about.So if you want the help let me know,I can even check your timing for you while it's here.
Later,
Blackrain
__________________
"When all else fails,pull the pin and see what's next!"
blackrain is offline  
Old 11-28-2001, 11:59 PM #9
evilklown2000
Re-heer!
 
evilklown2000's Avatar
 
Join Date: Apr 2001
Location: Mission Viejo, CA
 has been a member for 10 years
im gonna quote someone just because i found it pretty funny... in response to " what gun can you compare a rm too "

"i can compare it most closely to a blow gun because they both just plain out blow"

haha thats quality BE forum writing right there... lol
you guys crack me up
lets see how much time you guys can waste replying to this!
evilklown2000 is offline  
Old 11-29-2001, 08:28 PM #10
blackrain
 
 
blackrain's Avatar
 
Join Date: Nov 2001
Location: Belfair,Wa
blackrain is a founding member
 has been a member for 10 years
blackrain supports Bob Gurnsey
Talking WOW YOU HAVe A BUSHMASTER!!!!

SO DOES EVERY 12,13,14 YR OLD IN PAINTBALL.I own a Bushmaster,But it's the close bolt version,that's right,close bolt.Bet ya think I'm lyin.Let's see how good you really are.Post a pic when you find it(hope you can,they are kinda rare)Anyway,the RM is like #18 in my 25 gun collection!Has adjustable dwell,bps,select fire off the trigger taps.Humphrey valve just like your skinner,only faster reaction time.And I built it from scratch.Give these guys a brake,at least they know how to fix their gun.Hope this helps
Later,
Blackrain
__________________
"When all else fails,pull the pin and see what's next!"
blackrain is offline  
Old 11-29-2001, 09:46 PM #11
SGT BiGGiE
 
 
SGT BiGGiE's Avatar
 
Join Date: Nov 2001
Location: orlando
 has been a member for 10 years
Blackrain..you talkin about the same closed bolt i think you are?
__________________
Co_Captain of RedNeckz Paintball
2k2 blue vert cocker,shocktech 45 frame,crossfire 114 tank,freak kit,werks reg,werks bolt
SGT BiGGiE is offline  
Old 11-29-2001, 11:23 PM #12
blackrain
 
 
blackrain's Avatar
 
Join Date: Nov 2001
Location: Belfair,Wa
blackrain is a founding member
 has been a member for 10 years
blackrain supports Bob Gurnsey
Talking Actually there are two

I emailed you about both versions of close bolt.Were those the two you were thinking of?Or is there a third I don't know about.Hey I even have a close bolt Smart Parts BOSS.There's another stumper for the"PROS"!!!!
Later,
Blackrain
__________________
"When all else fails,pull the pin and see what's next!"
blackrain is offline  
Old 11-30-2001, 01:23 AM #13
SGT BiGGiE
 
 
SGT BiGGiE's Avatar
 
Join Date: Nov 2001
Location: orlando
 has been a member for 10 years
yup...was definatly the one..the great gun i have had many wet dreams about
__________________
Co_Captain of RedNeckz Paintball
2k2 blue vert cocker,shocktech 45 frame,crossfire 114 tank,freak kit,werks reg,werks bolt
SGT BiGGiE is offline  
 




Posting Rules
Forum Jump