[jeffc8239]

guns fixed the dwell and rate of fire was set way 2 low so its back 2 normal and shoots ropes

[Tikiman12]

Make sure have enough lube on the bolt. Also make sure you have enough pressure in your bottle. Don't forget to check the o rings on the plunger and bleed button.

Also your silonoid does not touch the air.

[jeffc8239]

thanks bro keep suggestions comeing on what it could be please i really need 2 fix it

[Tikiman12]

Your problem has to be your bolt or plunger not sealing on an oring somewhere. Relube the plunger, and bolt again. That's all I can think of

[jeffc8239]

ok well i have got the leak 2 stop but now the gun is not fireing its like its not getting enough air 2 the bolt when my tank is full and i dont hear a leak anywere..

[Tikiman12]

Originally Posted by jeffc8239

ok well i have got the leak 2 stop but now the gun is not fireing its like its not getting enough air 2 the bolt when my tank is full and i dont hear a leak anywere..

play with the pressure from your reg.

does your bleed button pop out and seal when you put your tank on the gun?

[jeffc8239]

ya it pops out it could be my reg thanks i will check that right now

[jeffc8239]

well i got the gun 2 shoot thanks 4 your help now i just how 2 figure out how 2 change it back 2 semi because some how it got changed 2 auto