Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 07-07-2011, 06:55 PM #1
cockergod18
 
 
cockergod18's Avatar
 
Join Date: Jan 2003
Location: nh
 has been a member for 10 years
cockergod18 plays in the APPA D4 division
pm5 leak seloniod?

I have a pm5 and I have a leak around the selonoid is there a bleed off valve for.the bolt that goes under it or is it the selonoid... I looked at the noid gasket and looks fine and if the noid is bad how do I confirm that .... thanks Alex
__________________
BALLS IN YUR MOUTH.
http://www.pbnation.com/showthread.php?t=3983420
cockergod18 is online now   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 07-07-2011, 07:21 PM #2
ToBeUsedToBE
Terrence Morton
 
ToBeUsedToBE's Avatar
 
Join Date: Feb 2011
Location: Boise, ID
ToBeUsedToBE is for the Gunfight
ToBeUsedToBE plays in the APPA beginner division
ToBeUsedToBE has achieved Level 3 in PbNation Pursuit
dont completely understand. can you tell where exactly the leak is coming from on the solenoid?
__________________
But there's no sense crying over every mistake
You just keep on trying 'til you run out of cake
And the science gets done and we make a neat gun
for the people who are still alive
ToBeUsedToBE is offline   Reply With Quote
Old 07-07-2011, 07:46 PM #3
cockergod18
 
 
cockergod18's Avatar
 
Join Date: Jan 2003
Location: nh
 has been a member for 10 years
cockergod18 plays in the APPA D4 division
It's coming from under the noid through a milled out square on the body under the noid with the wire leads are (sprayed some windex and that's where it pissed from)
__________________
BALLS IN YUR MOUTH.
http://www.pbnation.com/showthread.php?t=3983420
cockergod18 is online now   Reply With Quote
Old 07-07-2011, 07:48 PM #4
cockergod18
 
 
cockergod18's Avatar
 
Join Date: Jan 2003
Location: nh
 has been a member for 10 years
cockergod18 plays in the APPA D4 division
I just replaced every oring in the gun and I also replaced them all again
__________________
BALLS IN YUR MOUTH.
http://www.pbnation.com/showthread.php?t=3983420
cockergod18 is online now   Reply With Quote
Old 07-08-2011, 07:01 PM #5
mymutter
I crack myself up!
 
mymutter's Avatar
 
Join Date: Dec 2008
Location: the 847
mymutter is reppin' sidebar 4 life
even though the noid gasket looks good, it may not be.

problem is that you are going to have a fun time finding a gasket for that. The pm7's are 1.99, but for a pm5?? good luck.
mymutter is offline   Reply With Quote
Old 07-09-2011, 04:08 PM #6
rzhukov
 
 
rzhukov's Avatar
 
Join Date: Jul 2009
Location: USA
rzhukov is playing at Living Legends III
rzhukov owns a Planet Eclipse Etek
rzhukov supports Bob Gurnsey
rzhukov has achieved Level 1 in PbNation Pursuit
try noid gasket or replace o-rings in the mid section of the bolt again
rzhukov is offline   Reply With Quote
Old 07-10-2011, 04:30 AM #7
cockergod18
 
 
cockergod18's Avatar
 
Join Date: Jan 2003
Location: nh
 has been a member for 10 years
cockergod18 plays in the APPA D4 division
It's the middle oring on the bolt I have changes it 6 times and it still leaks ... I put a bigger oring that was a lot tighter and the leak stoped but then I needed super high pressure to operate and when the right oring is in it only leaks when the bolt is back when the bolt is foward it stops leaking
__________________
BALLS IN YUR MOUTH.
http://www.pbnation.com/showthread.php?t=3983420
cockergod18 is online now   Reply With Quote
Old 07-12-2011, 09:36 PM #8
subiepntbllr
It's just a game!!
 
subiepntbllr's Avatar
 
Join Date: May 2009
Location: spanaway
subiepntbllr plays in the APPA D4 division
Change the o rings on the top housing of the bolt, " the big ones"
subiepntbllr is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump