Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 07-05-2011, 07:23 PM #1
FearNaught
 
 
FearNaught's Avatar
 
Join Date: Apr 2005
Location: New York
FearNaught has achieved Level 1 in PbNation Pursuit
FearNaught has perfected Level 1 in PbNation Pursuit
SP1 Leak only when trying to achieve over 260 fps

Basically the title says it but to elaborate, i have an sp1 with a blackheart board and i cleaned the regulator and cleaned the gun and put in a new battery but when i try to increase the regulator up above about 260 to 270 fps the gun leaks from the solenoid like its blown.
FearNaught is offline   Reply With Quote
Old 07-10-2011, 06:19 PM #2
RaymiusII
The All Knowing One
 
RaymiusII's Avatar
 
Join Date: Oct 2006
Location: PDX
Annual Supporting Member
check the hoses. I would guess it is leaking from the hose and not the solenoid becasue a broken solenoid leaks all the time.
RaymiusII is offline   Reply With Quote
Old 07-23-2011, 02:18 AM #3
prettylou
Por favor nene!
 
prettylou's Avatar
 
Join Date: Oct 2006
Location: Nj
prettylou donated to help Peyton Trent
prettylou is playing at Living Legends III
prettylou is playing at Living Legends V
prettylou supports DLX Technology
Check the orings on the screws that attach the board to the breech. If they look flat , change them and relube. And dont over tighten them. Hope this helps
__________________
Generously Sponsored by
Valken* GOG/Luxe * QuickShot * Virtue * FogDoc * DeadlyWind
prettylou is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump