 |
03-05-2010, 10:48 PM
|
#1
|
|
check your hopper
|
non shooting nerve...help
I just got a nerve in my hands, loving this marker but it shot about ten times and now I can't get it to fire anymore. HELP i've replaced the noid and that has not helped, the lpr looks clean and all there but i'm not sure about the spring if it's weak. any help is appreciated.thanks
|
|
|
|
03-06-2010, 12:40 PM
|
#2
|
|
It's not a Geo2, honest..
Join Date: Mar 2004
Location: London, UK
|
Probably too obvious, but have you tried changing the battery?
|
|
|
|
|
03-06-2010, 09:57 PM
|
#3
|
|
check your hopper
|
yes replaced the battery, changed dwell settings, adjusted both regs in and out. I was on zdpbs and it said that if I removed the solinoid insert and it did not leak any air that I had a lpr problem. I've cleaned lubed and rechecked and still nothing. I'm not getting air past the inline reg to the lpr! any help is appreciated
|
|
|
|
|
03-06-2010, 10:14 PM
|
#4
|
|
vGisgo
Join Date: Apr 2006
Location: Livonia, MI
|
If you have the lpr extender make sure you only have two o-rings on the outside of the lpr and not three. If you remove the sleeve there should be one o-ring at either end of the lpr with an empty groove between them. If that groove has an o-ring in it you won't get any air to the noid.
__________________
Assumption is the mother of all **** ups.
"Thats a lot of Romans over there." "Yes but not one of them is Gisgo." Hannibal Barca and general Gisgo before the battle of Cannae in 216 BC.
"The league is a joke. I hate the "parity and the endless season. I hate these crappy franchises in Phoenix and Florida that dilute the talent pool. Too many teams make the playoffs and teams that use skill to produce stellar regular season records are forced to play mediocre teams who benefit from the looser playoff officiating. But most of all, I hate Gary Bettman who is the worst commissioner in any league.....ever". - bigolechet.
|
|
|
|
03-07-2010, 09:26 AM
|
#5
|
|
It's not a Geo2, honest..
Join Date: Mar 2004
Location: London, UK
|
OK, no air passing through the LPR, but just to confirm that that is the extent of the issue, do you have any air entering the marker at all? Any air pressure registering on the FRM's (VA's) pressure gauge?
|
|
|
|
|
03-07-2010, 05:16 PM
|
#6
|
|
check your hopper
|
yes!! I have pressure at the inline reg, pressure at the gauge and as far as I can tell that's it. i'm not getting any air into the lpr. I have switched the asa for the reg and still nothing. As far as I can tell it is not getting any air past the inline reg. any and all help is appreciated nation!!
|
|
|
|
|
03-10-2010, 06:35 PM
|
#7
|
|
Join Date: Jul 2003
Location: Downers Grove, IL
|
When I had my nerve if the LPR assembly was screwed too tight it would not fire.
|
|
|
|
|
03-18-2010, 09:46 PM
|
#8
|
|
|
Remove the lpr completely. Give a tiny bit of air..is it rushing out of the new missing lpr area? If so then you have air passing to the lpr. Is your lpr in far enough? You should have about 3mm to 6mm showing. You can easily test by backing the lpr out completely and screw in, pull trigger, repeat. If the lpr is all the way in and no firing, then the lpr is assembled wrong. Have you checked to make sure your noid is clicking? Put your ear up and pull the trigger..you should hear a light click. No click..bad bad, noid, board, wire, upper board.
|
|
|
|
|
03-20-2010, 04:27 PM
|
#9
|
|
Join Date: Jan 2009
Location: Kentucky
|
Probably too simple but have you tried switching between vision and non-vision when you are trying to fire it.
|
|
|
|
|
09-23-2011, 10:41 PM
|
#10
|
|
Shoot. Kill. Win.
Join Date: Nov 2008
Location: South Texas
|
I'm having the same problem. Was this ever resolved? I've pretty much done everything x__x
|
|
|
|
|
09-24-2011, 02:28 AM
|
#11
|
|
The Hobbit
Join Date: Oct 2005
Location: Western PA
|
have you checked the battery? Always check that first as it is the cheapest fix.
|
|
|
|
|
09-24-2011, 06:40 AM
|
#12
|
|
Shoot. Kill. Win.
Join Date: Nov 2008
Location: South Texas
|
Yeah i've tried the battery. The air is getting past the lpr, but it's not going any further. When i remove the solenoid insert no air comes out when it's aired up.
|
|
|
|
|
09-24-2011, 12:10 PM
|
#13
|
|
Shoot. Kill. Win.
Join Date: Nov 2008
Location: South Texas
|
My solution: Increase HPR to 250, Increase LPR to desired velocity... haha!
|
|
|
|
|
09-25-2011, 09:30 PM
|
#14
|
|
The Hobbit
Join Date: Oct 2005
Location: Western PA
|
glad you got it working man. Enjoy it they are killer guns.
|
|
|
|
|
10-23-2011, 05:31 PM
|
#15
|
|
Join Date: Jan 2009
Location: Kentucky
|
Quote:
Originally Posted by JonKerry
Yeah i've tried the battery. The air is getting past the lpr, but it's not going any further. When i remove the solenoid insert no air comes out when it's aired up.
|
That is not right at all. With the noid insert out and air on the gun you should have a constant flow of air out of the noid insert passage. If not then air is not getting past your LPR. |
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
