So a piece of my epiphany broke off the other day and since I don't know what its called I will have to explain. The piece that the 1st screw or (body flat cap screw) screws into right under the barrell snapped off. I'm wondering if there is a washer or anything like that which would have the same threads as the screw that I could super glue so at least my gun would hold together.
Any help is much appreciated,
Thanks,
Dave
So a piece of my epiphany broke off the other day and since I don't know what its called I will have to explain. The piece that the 1st screw or (body flat cap screw) screws into right under the barrell snapped off. I'm wondering if there is a washer or anything like that which would have the same threads as the screw that I could super glue so at least my gun would hold together.
Any help is much appreciated,
Thanks,
Dave
you could propably find a screw like that one (i call it the breach screw idk what the actually name for it is) at a home depot or a local hardware store.
Or call GOG or smartpartsparts.com and ask if they have a replacement screw.
__________________
PSP or NPPL??? it doesnt matter I play both!
Milsim Player- Complete All Black Dye Tactical gear and black DAM setup
Thanks Christ@Pooty for makeing my LUXE1.5w/2.0 board and 2.0 core 100%sexier with the 3 real Swavorski Chrystal mods!
Yeah, take the screw to your local Home Depot or something like that. if you can't find one there smartparts.com ought to work. And That sounds good to me, it is now officially called the breach screw
get some pics of what happened... if the screw broke you can take a dremel tool to the top of it, cut a slot, and back it out with a flathead screwdriver and then just get a new one... but pics would be quite helpful if you need some assistance
get some pics of what happened... if the screw broke you can take a dremel tool to the top of it, cut a slot, and back it out with a flathead screwdriver and then just get a new one... but pics would be quite helpful if you need some assistance
So I ended up going into Ace and getting a longer screw with the same threads and screwing it into the body and it holds together pretty well. Thanks for the suggestions guys!
