[beastmode986]

well i think i can call it a double ion i have an idea of mounting two ions to one grip frame but i dont know how to i was looking through the old voided warranty posts and i found a dual ion but it was a mech it was two ions on a board mounted to one grip fram now i would do this but 1 i dont know how to link both bodies to the grip frame also i know it would be more difficult but how would i make 2 electro ions on the same grip frame i want the highest rof i can get i kinda want to make some sort of turret any ideas?

[rammstein_5v2]

Why don't you make an asa mount with some sheet metal, splice into the existiing microswitchs on the board wires that lead to another microswitch that you place in some cheap frame mouned to that sheet metal. That way you aren't really messing with the two ions besides for a little bit of soldering on the microswitch and all the other work comes from a hammer, sheet metal, and driling holes so you can mount **** to them.

[beastmode986]

what would i solder though

[beastmode986]

like specifically what wirees

[rammstein_5v2]

the wires or leads on the switch..

Look asking help is one thing, but having everyone tell you exactly what you need to do it no longer becomes a project, its a tutorial. If your doing the project, its on your part to make it happen.

[thermodynamics]

Originally Posted by rammstein_5v2

the wires or leads on the switch..

Look asking help is one thing, but having everyone tell you exactly what you need to do it no longer becomes a project, its a tutorial. If your doing the project, its on your part to make it happen.

This.

Also Beastmode, I have noticed you have been making a lot of posts in VW lately. Now, not to be "that guy", but a lot of your "questions" have been done before, and could have been found by doing a simple search for it.

Also, if you are really serious about a project or an idea, be a little more specific in your posts, instead of "what are some mods". For people to help you, we need to know a bit more about what you are wanting from the project (assuming you have already done a search and could not come up with an answer)

[beastmode986]

yes ive looked through so many pages of voided warranty looking for ideas i either want to make dual ions or ul frame it

[Blastman56]

Hows the coffee table going?

[beastmode986]

good ill post pictures when i finish

ahh heres what i wanna do
http://www.pbnation.com/showthread.php?t=3183375

also i have a project i really want to do and its making an open bolt ion and making it gas through grip like this one
http://www.youtube.com/watch?v=QcpsQ...el_video_title

[Blastman56]

Ion is open bolt.

[new ion?]

I hate to really be THAT GUY but, with the questions you're asking, I'm gonna say you don't have the skill to do what you want...

There's a saying round here. If you have to ask, you can't do it. Now, that's a extreme as some questions, like confirmation of board wires or whatever is understandable, but you're almost asking do a walkthrough, and that's where we step back.

[thermodynamics]

Originally Posted by new ion?

I hate to really be THAT GUY but, with the questions you're asking, I'm gonna say you don't have the skill to do what you want...

There's a saying round here. If you have to ask, you can't do it. Now, that's a extreme as some questions, like confirmation of board wires or whatever is understandable, but you're almost asking do a walkthrough, and that's where we step back.

QFT

[FalconPunchKid]

thats some crazy sickness right there!