shocktech body kit?

rommelr · 04-10-2011, 09:51 PM

is this item even worth it, cause i see as if i still have to split the upper and lower bodies apart just to be able to remove the bolt out back...
while the techt sleeper body just allows me to unscrew one piece from the back to remove the bolt...

anyone can throw in there 2 cents and lmk if it is worth it?

Thanks...

Krazylegz · 04-10-2011, 09:59 PM

Well this is a quote right from the product description on their website:

"All kits come with a quick release back cap for easy, one screw access to facilitate bolt removal."

Taken from here.

rommelr · 04-10-2011, 10:05 PM

Quote:

Originally Posted by Krazylegz

Well this is a quote right from the product description on their website:

"All kits come with a quick release back cap for easy, one screw access to facilitate bolt removal."

Taken from here.

so how does this entail on what i wanna know/hear?
cause if these statements are true then where would it make it one-screw accessible and bolt out the back!
pls show/point it out to me, if possible...

ImpulseFreek · 04-10-2011, 10:43 PM

I have a shocktech bodies and I love it. It is a 100% Bob bodie kit. All I have to do is remove the tail screw and then unscrew the fireing can and there my bolt.

rommelr · 04-10-2011, 10:46 PM

Quote:

Originally Posted by ImpulseFreek

I have a shocktech bodies and I love it. It is a 100% Bob bodie kit. All I have to do is remove the tail screw and then unscrew the fireing can and there my bolt.

is their a rear hose that has to get screw via the end cap... which wont allow the end cap to come off unless unscrewed as well, i totally agree on the tail screw part...

Bigfatts · 04-11-2011, 05:45 PM

Nope, like ImpulseFreek says remove the tail screw, pull the back cap and unscrew the can. That's it. No hoses, banjoes or other fittings to mess with.

Krazylegz · 04-11-2011, 05:46 PM

On my Deadlywind body kit it came with a different style donut thing for the back which essentially eliminated the need for the rear banjo fitting. I can take pictures of mine, but since it's technically not the same as the Shocktech, it may or may not help you figure it out. It looks to me like it's basically just a body cover that covers the firing can and breech, and then there's a back cap that covers up the rear of the tube. Removing the grip screw would allow you to remove the back cap, which in turn allows you to back out the firing can and bolt. Definitely hard to imagine without having the pieces in your hand, but maybe I'll snap some pictures for ya later.

ImpulseFreek - any chance you can take pictures since you have the Shocktech body in question? That'd definitely be the best solution.

rommelr · 04-11-2011, 09:34 PM

Quote:

Originally Posted by Krazylegz

On my Deadlywind body kit it came with a different style donut thing for the back which essentially eliminated the need for the rear banjo fitting. I can take pictures of mine, but since it's technically not the same as the Shocktech, it may or may not help you figure it out. It looks to me like it's basically just a body cover that covers the firing can and breech, and then there's a back cap that covers up the rear of the tube. Removing the grip screw would allow you to remove the back cap, which in turn allows you to back out the firing can and bolt. Definitely hard to imagine without having the pieces in your hand, but maybe I'll snap some pictures for ya later.

ImpulseFreek - any chance you can take pictures since you have the Shocktech body in question? That'd definitely be the best solution.

i cant seem to make the body fit onto the holes to connect the bottom half now... im so frustrated by this is there somebody or somewhere i can send this to have it corrected or fix, willing to pay for these fixes!