Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 03-23-2011, 01:37 PM #1
Stormbird
 
 
Join Date: Nov 2009
Dye NT board prob

hi guys

i switched my NT10 board with my NT11 board to check why my NT10 double fire after 7-8 shot on semi auto. it will stop firing for 1 shot then after that it will double fire.

if i screw the NT10 board all the way in, it will refuse to fire. if i loosen the screws a bit it will return to normal. my NT11 don't have this prob.

here is the vid what will happen if the screws are all the way in.

(the board on this NT11 belongs to my NT10 )



gas is on (about 2k left ), battery still good.

the board is at

Psp mode
dwell 7
Trigger - 4
battery still good

anyone knows what happened to my board? thanks
Stormbird is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 03-23-2011, 01:49 PM #2
rossmorgan29
Check Please
 
rossmorgan29's Avatar
 
Join Date: Jul 2010
Location: Dallas Tx
rossmorgan29 owns a Planet Eclipse Geo
There's a very simple answer to this. Boards are drippy sometimes. In the 8 years I've been playing, that's something I've just grown to accept. Take it as an opportunity to upgrade to a virtue or tadao lol.
rossmorgan29 is offline   Reply With Quote
Old 03-23-2011, 01:53 PM #3
zyzek
taquito puncher
 
zyzek's Avatar
 
Join Date: Jan 2005
Location: Citizen of the World
zyzek is a Professional paintball player
zyzek works for a Paintball manufacturer
zyzek donated to help Peyton Trent
...just so you know...

Stock dwell on a NT11 board is 9. Stock dwell on NT10 board is 6. If you switch boards there will absolutely be variations in cycle rate due to the valve staying open longer.

Best of luck to you!
zyzek is offline   Reply With Quote
Old 03-23-2011, 02:04 PM #4
Stormbird
 
 
Join Date: Nov 2009
i see, i did try to dry fire my NT11 with NT10 board in it. it wont fully cycle because the dwell is too low.i didnt change the setting. i love my NT11 stock factory setting.

i did change the board back to my NT10 and same prob happened. the screw must be loose a bit for the marker to fire.

is this problem serious or will become worse in the future? thanks
Stormbird is offline   Reply With Quote
Old 03-23-2011, 05:38 PM #5
zyzek
taquito puncher
 
zyzek's Avatar
 
Join Date: Jan 2005
Location: Citizen of the World
zyzek is a Professional paintball player
zyzek works for a Paintball manufacturer
zyzek donated to help Peyton Trent
I would start off by keeping the NT11 board in the NT11 and the NT10 board in the NT10.

If the marker is working without the screw, and malfunctions with the screw, I'd say it's pretty safe to assume there is a short occurring. You may need a new board my friend. Sorry.
zyzek is offline   Reply With Quote
Old 03-23-2011, 07:13 PM #6
Stormbird
 
 
Join Date: Nov 2009
ok, thanks Zyzek, will contact my local tech to see if i can get a replacement board.
Stormbird is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump