Gen3 Empire Timmy Only shooting 220fps
I recently picked up a custom milled gen3 empire 1 timmy. Guy I bought it from said worked great below 100psi and so far it seems to be 77-93psi. I have the new tadao usb oled board installed and a cp reg, along with multiple less important upgrades.
My gun only shoots 200-220fps and I cannot seem to shoot any higher. Ramping and everything else works perfectly.
I have played with my dwell from 8.5ms to 22.0ms. When I put dwell at 6.0ms, the gun wont fire and also at 24.0 ms. But between 8.5 and 22, there is no difference in velocity. While also adjusting cp reg.
Should I just disassemble my marker, clean, and relube everything? or is there something else that I'm missing?
Central Florida Paintball