[chinolees]

ok ok i know the Epiphany is a played out gun and its an old gun, and no one plays with it anymore.... but i do. i had this marker sence 07, so please dont leave any crappy comments about me using an Epiphany, i love the way this gun shoots. i just need help on my issue. thanks..

ok now ive never had an issue with my marker untill now. for some reason, my gun isnt shooting anymore.... ive always kept the gun clean and maintained it. ive replace the trigger, and now i have the Virtue board to see if that was the issue. and its still doing the same thing. when i put my tank on it, air goes threw the gun, but it wont fire, ive replaced the battery, cleaned the hoses, cleaned everything. and even with the new board, its still doing the same thing it was doing before. it seams like there not enoff air getting to the chamber for some reason...... ill pull the trigger and i hear like it wants to shoot, but it doesnt. alil bit of air comes out when i hit the trigger and times nothing happens....... im sorry if this sounds confusing, but this is the easyest way i can explain..... i just orders all new everything, chamber, eyes, just rebuilt the whole inside...... maybe something with the dwell? i hear something about that..... help please. thanks

[FallNAngel]

Sounds like one of the wires may not be connecting right (not plugged in, or bent pin) or perhaps a crushed wire.

[sumsemperfi]

battery, and dwell as well? i still shoot my epiph and love it..

[zackattack9909]

You said you cleaned everything, but did you clean the regulator? That could be the problem.

[Hel_Bound]

Chances are it is the sail oring at the middle of the bolt. This seals the 2 chambers, if the oring is worn or bad you'll get either a puff or tiny bit of bolt movement but no action and no firing.

Replace the oring, relube and it should work.

*some of the aftermarket oring kits are a little off on oring sizes. Such as Capitan Oring, I ordered a shocker kit from them only to find majority of the orings were miss-sized and didn't fit. Check the epiphany manual and see what size it should be, compared to what is in your kit.

[bdennis02]

Might sound stupid but, change the battery? i had that problem wehre the bolt wasnt going fast enough in my ego , and it turned out to just be the battery, hope you got your problem all fixed.