Angel A1 fly o-ring size chart???

Jsrtz · 02-02-2011, 03:26 PM

Hey guys i want to go through my whole gun and put fresh orings on it....I just need help to find all the sizes and all the orings on the guns including the reg. Can anyone help me to find where I can find that? Thanks in advance

pi.moon · 02-02-2011, 03:39 PM

http://angelsports.com/e_blast07/140...rease-lube.pdf

dr.strangelove · 02-02-2011, 09:21 PM

Some of the seals in the grease card aren't user accessible. Your best bet would be to buy a rebuild kit from www.fixmyangel.com or oringmonkey. It'll come with all the seals you need and none of the ones you don't.

Winnebago · 02-02-2011, 10:02 PM

you can also get the master tech tray. it's on fixmyangel.com

Janek33 · 01-29-2013, 10:28 PM

Hi,

can someone upload the oring file chart for me please?

I'm also loooking for a exploded drawing of the Angel 1 Fly.

Many thanks

dr.strangelove · 01-29-2013, 11:31 PM

You can download the manual, which includes several cutaway diagrams, as well as the grease and lube card at www.angelowners.com . If you have any problems signing up, you can download them here as well:

http://angellasereyes.com/images/A1%...ube%20Card.PDF

http://angellasereyes.com/images/Ang...y%20Manual.PDF

Janek33 · 01-30-2013, 01:18 AM

Thanks dr.strangelove.

But I just downloaded this charts.

Are there any differents between the SE and SB concerning the orings?

And do you possibly make your own chart where all necessary orings are listed?

PS: sorry for waste English but I'm working on it.

dr.strangelove · 01-30-2013, 01:23 AM

Those manuals were both published by the manufacturer, so I couldn't help you with an updated version. From the Fly to the SB there shouldn't be any difference as far as seals go.

Janek33 · 01-30-2013, 02:13 AM

ok I will create one...and if you will you can add them to your homepage or at angelowners

dr.strangelove · 01-30-2013, 02:33 AM

If you want, just go ahead and post up your work at AngelOwners and we can sticky it.

Janek33 · 01-30-2013, 07:17 AM

I will do...

But I have the first problem...after that I'm done

At Page 35 & 36 grease-lube.pdf...what sizes are...

114049 - Oring for VOLUME CHAMBER MAINTENACE PLUG ?
111055 - VOLUME CHAMBER END PLUG ?

Maybe there is also existing a exploded drawing of the AR:K?

dr.strangelove · 01-30-2013, 07:27 AM

The sizes aren't listed in the grease and lube diagram and I don't know them off hand. You can download the AR:K manual here: http://angellasereyes.com/images/Ang...K%20Manual.pdf

Jay Angel Paintball · 01-31-2013, 08:28 PM

Quote:

Originally Posted by Janek33

I will do...

But I have the first problem...after that I'm done

At Page 35 & 36 grease-lube.pdf...what sizes are...

114049 - Oring for VOLUME CHAMBER MAINTENACE PLUG ?
111055 - VOLUME CHAMBER END PLUG ?

Maybe there is also existing a exploded drawing of the AR:K?

Factory seal kits are still available. Since the durometer and material of each oring does matter, I think these are preferable to the all neoprene or buna-n kits that are available in the aftermarket.

Janek33 · 02-01-2013, 03:12 PM

If the durometer and material is known you can assemble your own oring kit and it will contain the same orings as the factory seal kits but it cost you much less than a factory seal kit...in Germany I pay 15 dollar for only one kit...if I will contain them by my self it costs 2 dollar

Did anybody know what sizes are...

114049 - Oring for VOLUME CHAMBER MAINTENACE PLUG ?
111055 - VOLUME CHAMBER END PLUG ?