[infamoussmiley]

I've recently accepted the task of restoring a WG-65 from Armotech. I need parts. Where can I get parts?





Missing the RVA



What internals I have -

It looks like I need a hammer, connecting pin, RVA, main spring, and spring guide.


The Valve looks complete. The Vertical ASA had a 90 degree ASA adapter cross thread and seized up inside it. I was able to remove it but the threads to the ASA are rough. I rechased them with a tap. The ASA should be replaced.

I also noticed that the trigger assembly/frame is similar to a spyder's. If so, then the electro frames should work great. This marker has a lot of potential

Smiley

[<splatmaster>]

I tried using a spyder e-mr1 e-trigger a couple weeks ago, im not sure if all spyder frames are the same but mine didnt quite fit. I have an armotech e-trigger, i would consider selling it for the right price if your interested.

[ZeroStryfe]

Don't know if you are still looking for parts. If so let me know.

[michaeldove]

Originally Posted by ZeroStryfe

Don't know if you are still looking for parts. If so let me know.

Im looking for Armotech WG-65 parts if you have any.
michaeldove@aol.com

[kespinoza]

You COULD have a complete Armotech with upgrades... Great marker, just never use it now-a-days.

http://www.pbnation.com/showthread.p...light=armotech

Let me know if you are interested! Thanks!

[Jaguar_28]

I don't know if it will help, but I have a Warsensor WG66 that I have resorted. If you wish I could sell that to you and your can strip it for parts for the WG65 if you want. It comes with the magazine kit, rail, rifle scope, spare o rings, and is in great shape. All o-rings have been replaced and are oiled, springs replaced as well.