[Modat]

I know there are tons of threads on the best settings for the NT, but I have not seen any specific for the NT11. Seing that the nt11 is a little different then othet nt10s I just wanted to see what settings everyone is running at.

PSI? Which color insert. Which spacer and what dwell?

[wesr]

i would assume most run at the smoothest possible, which would be what dye posted in the description green insert ~110psi no inserts dwell 9 not much else you can do

[Cnoddings0364]

My settings are
~105 psi
green tip
no inserts
dwell at 9
275-280 fps

Works great!

[Luxe4life]

Originally Posted by Cnoddings0364

My settings are
~105 psi
green tip
no inserts
dwell at 9
275-280 fps

Works great!

Yo I got the same settings but below 310fps it has bolt stick any help?

[Nick6428]

Hi guy i'm newbie how do i set psi 110 or more plzz

[tacodorifto]

You use a hyper 3 reg tester made by dye. Without it you cant see/know what your psi setting is.

[gooferman609]

Originally Posted by Cnoddings0364

My settings are
~105 psi
green tip
no inserts
dwell at 9
275-280 fps

Works great!

really i have had issues running the "smooth" setup on my gun last time i played gun just stopped working for about 5 minutes then worked again. How do you keep your bolt from sticking at that low of PSI? Is it cause you upped the dwell a little?

[GaryR1984]

If your bolt is sticking and stopping, increase your dwell.