Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Thread Tools
Old 01-03-2011, 07:13 PM #1
Harbinger of Death
DFSniper's Avatar
Join Date: Dec 2003
Location: Fairbanks, Alaska
 has been a member for 10 years
DFSniper donated to help Peyton Trent
DFSniper helped look for balloons
Building a T1

I got a T1/ZIP kit from a friend of mine for a project and i need some help.

first, the leads on the noid are broken off at the base, is there any chance of soldering them back together? if not, how much do they go for new/used?

second, does the ram spring just rest on the valve/cross pin in the body?

third, will a 2k2 timmy bolt work, or does it HAVE to be a T1 bolt?

fourth, i have 2 boards: one says M3 Paintball (C) 2003 and has 4 plug-in connectors, the other one says Preco Corp and has 3 sets of connectors and a small capacitor. ill get some pics up later if that will help.
[Timmy Clan]
R.I.P. Rob Kerr 2/1/91 - 3/15/10
R.I.P. Chad Northcutt 11/25/89 - 5/4/16
Spyder pump conversion! Otter's Project LP Reposted!
DFSniper is offline   Reply With Quote
Old Sponsored Links Remove Advertisement

Thread Tools

Posting Rules
Forum Jump