Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 12-21-2010, 09:44 AM #1
lovepaintball15
 
 
lovepaintball15's Avatar
 
Join Date: Aug 2009
Location: FT Riley Kansas
lovepaintball15 owns a Planet Eclipse Ego
lovepaintball15 supports Team VICIOUS
Question creed problem

well got this marker in a trade and used it and it was super loud when i shot it and then started leaking from the grips it sounded like then i called some creed place and they said it is probly over pressured so i lowered the lpr out and the leak stop but ill shoot it and it wont shhot very far but if i screw the lpr in too much it will leak but should i adjust the hpr or what im so confused if u could help any one that would be great
lovepaintball15 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 12-21-2010, 10:10 AM #2
SHOOTNPOO
MACDEV MASTER US TECH
 
SHOOTNPOO's Avatar
 
Join Date: Mar 2008
SHOOTNPOO works for a Paintball manufacturer
SHOOTNPOO plays in the USPL
SHOOTNPOO posts videos on PbNation
Start over with setting everything.

Turn HPR all the way in to zero it out.
Turn LPR all the way out to zero it out.

Start by
Gassing up the marker make sure no leaks.
Turn marker on with eyes off.
Use a 1/8 Allen and turn the hpr velocity screw 1 full turn out ( counter clockwise).
Then start at LPR with a 1/8 Allen
Turn the screw in (clockwise) to adjust for Velocity desired. Adjust LPR first with no paint untill you start shooting air out the front of the marker.
Once you have the marker cycling and shooting air. You can load paint and chrono the marker to desired FPS.
When adjusting the LPR only turn the screw 1/8 of a turn each time while in-between each adjustment pull the trigger to cycle the marker as you will start to see if you are gaining FPS.

If you run across the point and the LPR is flush and you are not shooting 300fps
Give the HPR a very small turn counter clockwise to open the flow alittle more. I would not go more than 1- 1 1/2 turns out on the HPR.

Please let me nbow if this helps you and if you have any more questions please call me as I can walk you through this.

Eric
SHOOTNPOO is offline   Reply With Quote
Old 12-21-2010, 10:14 AM #3
MstrKey
 
 
Join Date: Aug 2001
Location: SSM, Ontario, Canada
MstrKey is a founding member
 has been a member for 10 years
MstrKey is for the Gunfight
MstrKey supports our troops
First thing, is you need to adjust the HPR according to your type of Tank output. Do you have a high or low pressure tank?

You want to go in all the way(not hard just until it snugs up) then out 1.25 -1.5 turns for a high pressure tank, and about 1.75-2 turns for a low pressure tank.

Eric beat me to it lol.
__________________

ETEK 3LT, with 14" critical .680 barrel and cure 3 + bolt F/S

DM12 red with matching Boomy F/s

Last edited by MstrKey : 12-21-2010 at 10:19 AM.
MstrKey is offline   Reply With Quote
Old 12-21-2010, 10:41 AM #4
SHOOTNPOO
MACDEV MASTER US TECH
 
SHOOTNPOO's Avatar
 
Join Date: Mar 2008
SHOOTNPOO works for a Paintball manufacturer
SHOOTNPOO plays in the USPL
SHOOTNPOO posts videos on PbNation
Bill the 2010 hpr is 1- 1 1/2
Not like the older ones. They have different shim spring tension

Last edited by SHOOTNPOO : 12-21-2010 at 10:44 AM.
SHOOTNPOO is offline   Reply With Quote
Old 12-22-2010, 02:35 PM #5
MstrKey
 
 
Join Date: Aug 2001
Location: SSM, Ontario, Canada
MstrKey is a founding member
 has been a member for 10 years
MstrKey is for the Gunfight
MstrKey supports our troops
reg settings and shims

Quote:
Originally Posted by SHOOTNPOO View Post
Bill the 2010 hpr is 1- 1 1/2
Not like the older ones. They have different shim spring tension
Ahhhhhhh to compensate for the LP or HP tanks I imagine? Good idea. It needed to be done, too many people get confused. Did they just add more shims? Or reconfigure them? I have spare shims around I could readjust mine if that's all they did.
__________________

ETEK 3LT, with 14" critical .680 barrel and cure 3 + bolt F/S

DM12 red with matching Boomy F/s
MstrKey is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump