I looked around the sticky's thinking I could find a fix for this but I can't seem to find anything. I'm not overly familiar with matrix's but I am a certified shocker tech so I do know a thing about fixing markers. Hopefully the Dye community can help me out with this problem.
I've got a dm6 here that is having a strange leak. It air's up and you can hear a very tiny leak somewhere in the bolt area. It's very subtle and I can't exactly pinpoint it. I shoot a shot and the marker will leak air down the barrel for about a second, then it will seal back up (although it still has the miniscule leak, it's not a gushing leak like whenever a shot is fired). I've tried cleaning/replacing/lubing the orings but I'm still having this problem. The dwell and reg pressure's also seem to be fine. What could be the cause of this? The fact that the leak is happening upon firing the marker leads me to believe it could be the front bolt oring not sealing? But I'm not matrix savy so hopefully you guys can help me out with this. Thanks guys!
Dwell is set to stock. I've tried using various forms of dow 33 (sleek and slick lube). I'll have to check the lpr after I get off work. It should be find because I have not touched it and it worked before this leak developed.