Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 04-28-2016, 07:03 PM #1
collin348
from the chilly north
 
collin348's Avatar
 
Join Date: Nov 2005
Location: Brampton, ON (Toronto)
 has been a member for 10 years
collin348 owns a Planet Eclipse Lv1
Ego 11 breach leak

Hi, I have an ego 11 with a slight breach leak, still works. The leak gets louder with the bolt out. I tore it apart lubed everything even swapped out the valve guide and valve. I changed three orings on the rammer. I aired it up pulled the bolt with the rammer forward while its aired up and it gets louder from the back rammer chamber.
__________________
CS1
LV1
SL94
collin348 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 04-29-2016, 11:23 PM #2
MstrKey
 
 
Join Date: Aug 2001
Location: SSM, Ontario, Canada
MstrKey is a founding member
 has been a member for 10 years
MstrKey is for the Gunfight
MstrKey supports our troops
Stick your finger into the breech and lightly cover the vent hole that goes into the bolt. If the leak is coming through there, then you have a cup seal/valve body oring issue. If it's coming out of the slot for the bolt pin, then it could be a leaky/overpressurized noid, or hose barb.

You mentioned getting a leak out the back ram chamber when pulling the bolt forward. It may be that you're just pushing down on the pin and tilting the rammer which causes a leak.
MstrKey is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump