Just picked up an LV1 used. No air to test fire at the moment.
-I turn the gun on and with the bolt back it shows ( ), eye activated but no ball detected.
-When the bolt goes forward I get (*), so the eye is detecting the bolt.
-If I pull the trigger I hear the "click" but then I see [ (rotated 90 degrees left), which is a fault. I can still pull the trigger and hear the click as long as the bolt is forward.
-I pull the bolt back and get [ ].
-If I push the bolt forward I get[*].
-If I pull the trigger I get [ again....
Is this normal? Not understanding why I am getting a fault.... I did pull the eyes recently to clean them. Advice appreciated.
Last edited by Wootwoot! : 05-30-2016 at 12:51 AM.