Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 11-24-2010, 03:33 PM #1
juit
CHEECH IS G@I
 
juit's Avatar
 
Join Date: May 2008
Location: mission
Annual Supporting Member
juit supports Team VICIOUS
juit is for the Gunfight
juit posts videos on PbNation
juit has achieved Level 2 in PbNation Pursuit
juit has perfected Level 2 in PbNation Pursuit
Lightbulb Quick steel 4B bolt pin mod for only 5 bucks

you can get this at walmart for 5 bucks

I cleaned with acetone the bolt pin
leave the o rings
mix a small amount of paste and do the cones near the orings
after it cured for 3 minutes "semi firm" take out the orings and clean the groove
mix a small some more and add in the middle
let it stay for 15 minutes
lube o rings and chorno
if U add too much just sand from the middle
if it chrono HI you can clean with acetone the middle and add some more

this is the final result after sanding till got the correct FPS


the draw back is that I cant use a GM bolt because I tune it to a stock bolt

if U tune it to a GM bolt prolly you will need to add if you swap to a stock bolt

if tuned to a stock bolt and want to use a GM you will need to sand till you get the FPS

I hope this helps

Last edited by juit : 11-26-2010 at 04:20 PM.
juit is online now   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 11-25-2010, 12:47 PM #2
chnk
faps
 
chnk's Avatar
 
Join Date: Jul 2007
Location: Ga
not a bad idea, I think the lube might eat through a little after the pin remains soaked in it
chnk is offline   Reply With Quote
Old 11-25-2010, 12:56 PM #3
juit
CHEECH IS G@I
 
juit's Avatar
 
Join Date: May 2008
Location: mission
Annual Supporting Member
juit supports Team VICIOUS
juit is for the Gunfight
juit posts videos on PbNation
juit has achieved Level 2 in PbNation Pursuit
juit has perfected Level 2 in PbNation Pursuit
Quote:
Originally Posted by chnk View Post
not a bad idea, I think the lube might eat through a little after the pin remains soaked in it
no, this thing is for leaks acid corrosive & heat resistant I Know that a mechanic on time use it on a motorcycle oil pan and never change it

you can polish it and will have a nice no porous finish or add a small JB WELD coat for a wet look

I have use this in PMR's instead of the tape mod and works great markers and Ive seen it last for more than 3 years and still working

Last edited by juit : 11-25-2010 at 02:35 PM.
juit is online now   Reply With Quote
Old 11-25-2010, 06:05 PM #4
tlmiller
 
 
tlmiller's Avatar
 
Join Date: Oct 2004
Location: AZ, USA
tlmiller is for the Gunfight
Just for further information, from the spec page:

Quote:
resistant to temperatures between -70ºC and +260ºC and, once cured, is impervious to most acids and solvents (including petrol and diesel). It does not conduct electricity and can be used as an insulating material.
So no worries about lube eating through it.
__________________
Pics and specs of my markers...tired of updating

2014 Vapor for sale only

Copy and paste this into your signature if you use Linux.
tlmiller is offline   Reply With Quote
Old 11-25-2010, 06:21 PM #5
juit
CHEECH IS G@I
 
juit's Avatar
 
Join Date: May 2008
Location: mission
Annual Supporting Member
juit supports Team VICIOUS
juit is for the Gunfight
juit posts videos on PbNation
juit has achieved Level 2 in PbNation Pursuit
juit has perfected Level 2 in PbNation Pursuit
Quote:
Originally Posted by tlmiller View Post
Just for further information, from the spec page:



So no worries about lube eating through it.
Thanks! for the info!!!
thread UPDATED

Last edited by juit : 11-25-2010 at 06:32 PM.
juit is online now   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump