If you took the noid apart you might have put one side of it on upside down. its real easy to do. That will cause the bolt to go forward and not back when aired up. Its the small end cap that has the two screws on it.
__________________
www.pootypaintball.com = For Custom anno, Ninja tanks, Custom 1-1 Guns, Custom Parts, Factory spares, Rare hard to find parts and upgrades, Gun mods, Lubes and Things
That wouldn't necessarily mean that air stops going through the noid, because when the bolt is in the forward position it only releases the air stored in the firing can. Your noid plunger seems to be stuck in the forward position.
"Originally posted by Scarface5555: hk doesnt suck. they just tend to focus more on getting laid and wasted more than focusing on paintball, or life in general. its like jersey shore plus some paintball."
"Originally posted by Scarface5555: hk doesnt suck. they just tend to focus more on getting laid and wasted more than focusing on paintball, or life in general. its like jersey shore plus some paintball."
