 |
11-19-2010, 10:53 AM
|
#1
|
|
Join Date: Feb 2009
Location: Long Island
|
Leak down the barrel, possibly the breach?
I just got the polizhed NDZ can from Pooty and i lubed it up and now have a leak down the barrel, if i stick my finger down the feednack and near the tip of the bolt i can stop the air from coming out.
Which oring would most likely cause this?
Any ideas would be appreciated, thanks.
|
|
|
|
11-19-2010, 11:15 AM
|
#2
|
|
Join Date: Feb 2009
Location: Long Island
|
Replace the front oring inner and oouter on the can and now there is a tiny leak coming out the back cap......i replaced the oring right in front of the back cap and its still there.....now what?
|
|
|
|
|
11-19-2010, 11:29 AM
|
#3
|
|
Join Date: Feb 2009
Location: Long Island
|
Anyone???
|
|
|
|
|
11-19-2010, 11:36 AM
|
#4
|
|
CLICK, CLICK, BOOM
Join Date: Dec 2001
Location: South Louisiana
|
There are 2 small metric orings on the latch for the back cap. Check those. Id also check the oring on the tip of the bolt guide.
|
|
|
|
|
11-19-2010, 12:15 PM
|
#5
|
|
Join Date: Feb 2009
Location: Long Island
|
Still have the back cap leak, this sucks....I replaced the oring on the inner side of the back cap too and the rear oring on the can and replaced the front oring on the bolt guide........no idea anymore and the screw to get to the 2 tiny orings that are on the back cap is stripped and I have a tournament this weekend, I guess this is why people tell you to not get a luxe....
|
|
|
|
|
11-19-2010, 12:16 PM
|
#6
|
|
Join Date: Sep 2005
Location: OC Cal
|
The leak from the back latch can be four things. Check in this order. Non of them have anything to do with the can.
Open the below link and print this also
http://www.zdspb.com/media/luxe/diagram_bolt_stock.jpg
1 - Back latch plunger 1x2.5 orings need to be replaced qty 2
2- Weak Back latch (hold down) oring 16/70
3 - Wrong or worn bolt guide rear oring 15/90 |
|
|
|
|
11-19-2010, 12:19 PM
|
#7
|
|
Join Date: Sep 2005
Location: OC Cal
|
Quote:
Originally Posted by XxHeadShotzxX
Still have the back cap leak, this sucks....I replaced the oring on the inner side of the back cap too and the rear oring on the can and replaced the front oring on the bolt guide........no idea anymore and the screw to get to the 2 tiny orings that are on the back cap is stripped and I have a tournament this weekend, I guess this is why people tell you to not get a luxe....
|
In most cases its the plungers small orings 1x2.5 that cause this leak. |
|
|
|
|
11-19-2010, 12:22 PM
|
#8
|
|
Join Date: Feb 2009
Location: Long Island
|
Also when I air up the gun the bolt will not be sucked all the way back and i would have to push a ball down inorder to get it in front of the bolt.
|
|
|
|
|
11-19-2010, 12:25 PM
|
#9
|
|
Join Date: Sep 2005
Location: OC Cal
|
Quote:
Originally Posted by XxHeadShotzxX
Also when I air up the gun the bolt will not be sucked all the way back and i would have to push a ball down inorder to get it in front of the bolt.
|
Did you take out any orings and replace them with random stuff?
Sounds like you need to watch this.
http://www.youtube.com/watch?v=-mI1RcT-ZAk |
|
|
|
|
11-19-2010, 12:29 PM
|
#10
|
|
Join Date: Feb 2009
Location: Long Island
|
Quote:
Originally Posted by Pooty51
In most cases its the plungers small orings 1x2.5 that cause this leak.
|
The screw to get to that is stripped any ideas?? |
|
|
|
|
11-19-2010, 12:30 PM
|
#11
|
|
Join Date: Feb 2009
Location: Long Island
|
Quote:
Originally Posted by Pooty51
|
No sorry I don't do that, I have a oring monkey 10x rebuild kit |
|
|
|
|
11-19-2010, 12:34 PM
|
#12
|
|
Join Date: Feb 2009
Location: Long Island
|
Quote:
Originally Posted by Pooty51
In most cases its the plungers small orings 1x2.5 that cause this leak.
|
The screw on the back cap to get to that is stripped, any ideas?? |
|
|
|
|
11-19-2010, 12:37 PM
|
#13
|
|
Join Date: Sep 2005
Location: OC Cal
|
Quote:
Originally Posted by XxHeadShotzxX
The screw on the back cap to get to that is stripped, any ideas??
|
I do think you can get to those orings without removing that stripped screw. Take a look at it. I think a gun I teched also had a stripped latch screw and i was able to leave the screw on and flip the plunger out..? |
|
|
|
|
11-19-2010, 12:40 PM
|
#14
|
|
Join Date: Feb 2009
Location: Long Island
|
Quote:
Originally Posted by Pooty51
I do think you can get to those orings without removing that stripped screw. Take a look at it. I think a gun I teched also had a stripped latch screw and i was able to leave the screw on and flip the plunger out..?
|
Negative........
Anyone know the number for Daryl?? Or anyone that can overnight me a back cap mechinism?? |
|
|
|
|
11-19-2010, 12:48 PM
|
#15
|
|
Join Date: Sep 2005
Location: OC Cal
|
Hours of operation M-F 10am till 6pm Eastern time
866 573-LUXE (5893)
707 293-9648
SKYPE LUXEPAIINTBALL (YES 2 II'S)
|
|
|
|
|
11-19-2010, 12:54 PM
|
#16
|
|
Join Date: Feb 2009
Location: Long Island
|
I just called and basically ordered a new back cap mechinism which will cost 50 bucks and need it over nighted and saturday delivery........FML........
|
|
|
|
|
11-19-2010, 12:59 PM
|
#17
|
|
Clarity
Join Date: Jan 2009
Location: Southern California
|
Just curious, how much did you pay for that Luxe? And was it through BST?
|
|
|
|
|
11-19-2010, 12:59 PM
|
#18
|
|
Join Date: Feb 2009
Location: Long Island
|
Quote:
Originally Posted by ZerOxShadows
Just curious, how much did you pay for that Luxe? And was it through BST?
|
Traded my victory..... |
|
|
|
|
11-19-2010, 01:12 PM
|
#19
|
|
Join Date: Feb 2009
Location: Long Island
|
Reason why the bolt was sticking out a little and hard to get a ball in is because i didnt screw the bolt guide down all the way......back cap mechinism should be in tomorrow.....
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
