Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 11-07-2010, 07:20 PM #1
juic3
 
 
Join Date: Dec 2007
G4 Regulator Teardown Question

Ok so i toredown the whole regulator, down to the steel ball and pressure seal. Lubed everything all up put everything back in order. tried firing the gun today and it will max out at 238fps. I did not get to shoot the gun prior to this, so i don't know if there was a problem before tearing it down. did i put the pressure seal (sled) the wrong way? i put the bigger opening of the pressure seal facing towards the velocity adjustment screw. plus i have found that dp over tightened the velocity adjustment screw to put niks on the steel ball.

anyone have a fix for this or a picture to show how the pressure seal is suppose to be facing?
juic3 is offline   Reply With Quote
Old 11-07-2010, 08:56 PM #2
l1ryan1l
<3<3<3<3<3<3 SLOTHS!!!!!
 
l1ryan1l's Avatar
 
Join Date: Jun 2008
Location: Boston, MA
l1ryan1l is an NCPA player
l1ryan1l plays in the APPA D4 division
l1ryan1l is one of the top 1000 posters on PbNation
l1ryan1l supports DLX Technology
the only thing i can think of is you're missing a shim or put in the shims in the wrong order
l1ryan1l is offline   Reply With Quote
Old 11-08-2010, 04:05 PM #3
juic3
 
 
Join Date: Dec 2007
there are no shims. this is the new regulator from dp. spring regulator. anyone have any other suggestions?
juic3 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump