Recent, well almost 2 months ago, I traded my Etek2 for a Quest.
The guy left, I aired it up, ok, no leaks... I shot a few... no problem.. then as I was playing, it just stops shooting, I replace the batteries, but in the rush, I guess I ripped the already super-torn battery harness, and I was tinkering with things and it was a windy day, and I also lost the solenoid wires.
Long story short, I got a new harness... ($25 + $27 shipping to Canada...)
And a blown solenoid with the wires still connected.
Now I'm at home, fiddling with the stuff, but I cant seem to get it to work,
I haven't soldered the wire to the solenoid, but with my past experience with guns, the gun usually fires, or atleast shows some signs of itself working with the wires touching.
I don't know what is wrong! The wires from the harness that connect with the wires of the noid are green and black, but the one's from the noid are brown and black, is that the problem?
When the gun is on, the LED continuously blinks green and blinks blue every trigger pull, and nothing happens when I put my finger in the breech (eyes).
I haven't 'balled since that day, and I'm really getting worried.
Help would be GREATLY appreciated!