Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 10-11-2010, 10:14 PM #1
mandypoopie
 
 
Join Date: Oct 2010
B2K2 LCD Issues

First i will declare that i am a nub in need of help.

I was given a ICD B2K2 LCD from a friend since he has not used it in a couple years. He did not recall the last time he used it and if it worked.

I tried to shoot it today and it does nothing. I put a new battery in it and the green power light comes on. When the trigger is pulled nothing happens, no sounds. The green indicator light flashes when i pull the trigger.

I looked at the board and did not notice any issues, burn marks etc.

I tried searching the web without luck. Please help. Thanks
mandypoopie is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 10-11-2010, 11:20 PM #2
63VDub
 
 
63VDub's Avatar
 
Join Date: Dec 2003
 has been a member for 10 years
okay, with a new battery and the LED blinking when you pull the trigger, that means all the electronics up to the solenoid are working. You using air or just dead cycling? if you are using air, null the LPR (counter clockwise until loose, then snug back up) and add air. Set the HPR to 225-250. slowly turn the LPR up until it cocks and add about 1/4 to 1/2 turn. Then fire, that ought to tell you if the solenoid and regs are working. That's not the best way to fine tune your regs, but it's a good way to start.
__________________
I like old VW's and ICD products.

I am at the pinnacle of mediocrity.

Wiring problems? I know the man who can hook you up with a brand new FURIOUS harness!!CLICK HERE!

http://www.icd-owners.com/ It's where you need to be.
63VDub is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump