Originally Posted by AjAk124578
check the output on each board with a volt meter?
It's tough to get the output current or voltage because the solenoid is only powered for a few MS. I wish I had a multimeter quick enough to get that, it would save quite a bit of time..
You are right, I was wrong with that one.. The MAC solenoids are Direct Acting versus the Indirect Acting solenoid that comes with the gun. Indirect-Acting solenoids require much less power because of the pilot valve, which requires much less power by using a smaller valve to open the larger valves and moving a larger amount of air. Direct acting noids are simpler in design but require more power because there is no pilot valve like indirect noids, it just moves one large valve, in the end, Direct noids are faster and more reliable, but require 6-8x more power to operate..