[Fizzwidget]

Hey guys, just what the title says...hardly any air is getting into the gun! The gauge on the reg registers at about 50 psi...I have no idea what to do! Please help!

[mgeringer]

Have you tried to adjust the input pressure via the allen hole at the bottom of the reg? Turning it clockwise allows more air = higher pressure. Adjust slowly and dry fire in between adjustments to ensure that the reading is accurate.

[maxearing]

make sure the reg is working, make sure the gauge is working and make sure your asa is screwed in all the way.

[Fizzwidget]

Originally Posted by mgeringer

Have you tried to adjust the input pressure via the allen hole at the bottom of the reg? Turning it clockwise allows more air = higher pressure. Adjust slowly and dry fire in between adjustments to ensure that the reading is accurate.

Yes I have tried that, it didnt do anything.

How do I check to see if the reg and gauge are working?

[MrJester]

zdspb.com

Check there for regulator maintenance and take your apart and relube everything.

[Fizzwidget]

well, I think i fixed it. the reg gauge still isnt reading any air, but it'll actually shoot now!

Turns out I had a dead battery xD

I hate when its you small stuff you don't check. Thanks for all your suggestions!