Dm6 Problems/ My dm6 slowly died

quiksilver2031 · 10-14-2010, 06:14 AM

i just recently received this dm6 and this is what i know my brother was using the gun when I was watching him shoot a string of balls. It all of a sudden just got shorter and shorter like he was running out of air. I thought the battery was dead but it wasn't that. does anyone have any ideas on what could have caused this i was thinking maybe the noid?

ballin v6 · 10-14-2010, 07:06 AM

Im not a huge matrix tech but im almost sure its not the solenoid.

reset your LPR and HPR and dwell as shown by in the stickies.

and take your bolt out, clean the old lube off and apply some dye slick, hater, or sl33k.

try these then come back to us.

massraptor · 10-14-2010, 08:20 AM

It sounds like the hpr needs to be cleaned and checked. Also reset the lpr. Relube bolt. Go from there.

quiksilver2031 · 10-14-2010, 09:18 AM

so basically just over haul the gun with new rings and lube and reset the board to default settings and go from there ok sweet ill try it i need it to be ready in time for world cup

quiksilver2031 · 10-14-2010, 09:18 AM

ballin i hope ur friend likes his pm6 its in really good of shape

ballin v6 · 10-14-2010, 03:21 PM

ya man, he cant wait. DM/PM's are great guns.

just got myself a dye dm6 just like you

dblk22vball · 10-14-2010, 06:26 PM

you also might want to check your ASA and make sure if it was an on/off that it was screwed in far enough and if it was a duckbill, that you screwed the tank on far enough. otherwise the marker would be starved for air and prone to shootdown.

and the HPR relube is a good idea.

quiksilver2031 · 10-15-2010, 05:56 AM

ok im gonna put a new dye on/off asa on it. and yeah i love dm/pms there just so smooth you cant even tell your shooting paint most the time.

quiksilver2031 · 10-15-2010, 05:59 AM

im really lucky with this dm6 tho cause im gonna take it to mike carthy on tues and he is gonna check all the stuff that you guys said i figured id let him do it since he is a certified tech