Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Thread Tools
Old 09-19-2010, 10:56 AM #1
SilverSamurai's Avatar
Join Date: May 2008
Hyperdrive Engage Board issue... maybe?

I managed to trace and purchase a Hyperdrive Engage board for my shocker, but it's doing some weird stuff when I power it up.

Ok, with the board fitted, and the upper board fitted to a humphrey noid, I attached a battery. Without touching the power button, the LED goes white whilst I'm connecting the battery. When the battery is completely inserted, the LED goes green, and the solenoid starts clicking. If you press the power button, nothing happens. If you press the trigger/micro-switch, the LED changes to red and then nothing else. It stays illuminated in red, and there is no flickering or clicking when the trigger is pressed.

If you try turning it off on the on/off button... nothing. De-powering is via disconnecting the battery.

I'm hoping someone who has a engage board can help me out, and point out something obvious that I'm doing wrong with regards to setting up my board.
I will slay all before me.
SilverSamurai is offline   Reply With Quote
Old Sponsored Links Remove Advertisement

Thread Tools

Posting Rules
Forum Jump