Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Thread Tools
Old 09-12-2010, 05:46 AM #1
slyyoung28 (Banned)
Join Date: Jul 2010
Location: Zanesville, Ohio
? about a 2k5 superstock

Does anyone know if a karni front block will fit a 2k5 wgp superstock?
slyyoung28 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Old 09-14-2010, 10:12 AM #2
Join Date: Nov 2009
Location: Orlando, FL
The Karni Front block has the 15* vertical ASA built in so you would have to figure out a way to plug the hole of the original 15* vert ASA. Or you would have to Mini the front which would cut off that part of the body. If you take the front block off of your 2005 SS you will notice that there is a notch milled into the body that matches up with a notch in the front block. This is so your front block doesnt spin around. Im not sure if the Karni block has something like that as well but Im only mentioning it because if you do end up Mini'ing the front of the body, it would be perfectly flat and may cause issues with sealing of the karni block. Not 100% sure about this but i figured id mention it as something to think about if you do end up doing this.
tmo6885 is offline   Reply With Quote
Old 09-16-2010, 10:41 PM #3
Rogue Marine
Rogue Marine's Avatar
Join Date: Sep 2010
on the karni doesnt the pneu's bolt onto the ASA? cuz on my prostock the asa is a separate detachable piece. idk about the superstocks havent kept up with those.
Rogue Marine is offline   Reply With Quote
Old 09-17-2010, 01:43 PM #4
tgs-killer's Avatar
Join Date: Feb 2005
Location: Southern California
 has been a member for 10 years
Yes a Karnivor frontblock will work with the 2K5 Pro/Super-Stock. If and only if the Karnivor frontblock is that of a [2nd Generation] not a 1st Generation. The differences are simple. The 2nd generation is basically notched like the 2K5 frontblock. The 1st generation has a slot, slotted on the top of the frontblock. Basically all you need to do is to plug up the VA ASA holes on the 2K5 body by tapping the holes for set screws and loctite some screws into the holes. Second, you need a Karnivor frontblock and shorten the backportion of it so that the frontblock fits nice and snug to the 2K5 body; sealing the banjo port Oring. Contact, "HMCL281" and he should be able to help you

tgs-killer is offline   Reply With Quote

Thread Tools

Posting Rules
Forum Jump