As for the vert feed, it will only work with the Em98 kit due to the conecting rod being able to be adjusted. In order to make a vetical feed for a standard 98, you'll need a slightly shorter rod. As for the side hole where the balls used to feed, I used JB Weld to to fill it in, then smoothed it out.
I'll try to write more on how it was done when I get pics up.
Gatorchris: I was thinking the same way about the hopper not being stable as I was working on the gun. What I done here was drill a hole 1in. diameter for the feed port and added a 7/8 plastic bushing that I cut from an old elbow. The 7/8 end of the elbow is slightly larger than 1in. so when the body halves are put together, it make for a very tight friction fit that won't come out. By using the 7/8 bushing, you can actully thread in a Angel high rise. But for right now I'm using a straight elbow adapter from a SL68II pump. So far there are no problems with it coming apart.
it is so cool im have the mod done!!!!!!!!!!!!!!!!!!
go team ridge boyz and team ridge boyz 2