V.2 SpeedsCustom's Shocker Frame

MrBLUEballZ · 08-21-2010, 10:57 PM

I'm so for this project that I even went out and bought me another shocker especially for this frame. Jeez is my girlfriend going to kill me, but I did buy her a new purse so hopefully it distracts her a bit.

Anyways, Mr. Jayson, if it's possible to make the frame fit my hybrid 15 degree asa, just let me know if it can be done and how much more it may cost. I would modify it myself but after butchering some previous projects, I learned the hard way that if you want something done right....just don't let me do it. Thanks.

SpeedsCustom-PB · 08-22-2010, 11:47 AM

Hey Mr BlueBallz.

Yea, you gotta make sure that the GF's are happy, or else...

Thanks for supporting and I hope to see you on the list. This week I should see new numbers coming in. So obviously more updates and news too be posted.

Thanks,

-Jason

SpeedsCustom-PB · 08-23-2010, 09:13 PM

Hello everyone. This week I will be getting new figures in that I will try and work with.

Right now, I would need a pre-order number between 60-75 people. If this can be achieved, that we can happily get this going.

I would also confidently say that whomever I work with, will have an understood time frame.

I'll let the numbers try and continue to rise, but I don't want to open the Pre-orders till I have the exact numbers and the deal is done concerning when the frames will finished etc.

Thank you all,

-Jason

yanks914 · 08-23-2010, 11:01 PM

moneys tight....guess ill be selling my CCM frame for this lol

SpeedsCustom-PB · 08-25-2010, 02:22 PM

Hey everyone, the numbers are starting to come in and I like what I see.

I just want to say that it's not all about the money. If I can lower the price that YOU GUYS pay, I will. But it will only be determined by the incoming quotes from various companies and what benefits me.

Even If I can lower the price a bit, it will certainly work with the Shipping.

I do have people I am talking with and we will further discuss the process.

I can certainly see a Pre-Order opening soon if all goes well.

Thanks,

-Speed

MrJester · 08-25-2010, 02:30 PM

w00t w00t

yanks914 · 08-25-2010, 04:06 PM

SpeedsCustom-PB · 08-26-2010, 05:27 PM

Thanks for the support

The next few days as I mentioned, the numbers are coming in.

As I said though, it's up too the community

-Jason

yanks914 · 08-31-2010, 07:36 AM

I have enough money in paypal....release pre-order before something breaks that i have to replace!!!

SpeedsCustom-PB · 08-31-2010, 07:45 AM

Alright Alright!

I'm just waiting back from a few e-mails but I have been speaking with a company that is completely capable of doing it, and they meet my requirements.

The Pre-order will open I'd say in the next week or so.

Thank you,

-Jason

MrJester · 08-31-2010, 07:51 AM

w00t w00t

yanks914 · 08-31-2010, 08:38 AM

Can't wait

Muddytaco · 09-06-2010, 09:30 PM

Going to start a shocker build just b/c of this frame

mgeringer · 09-06-2010, 09:41 PM

I need to get a PL body and get a frame to match it.. start me a project.

SpeedsCustom-PB · 09-07-2010, 08:15 PM

Hello everyone, was a great weekend. Great balling this weekend along with good eats

The new machine company is sending me samples of the anodize.

I'll be speaking with them more this coming week and will be opening the pre-order shortly

Very excited for the coming months.

-Jason

greenvertboy · 09-09-2010, 08:12 AM

Hey Jason,

Would it be possible for you to mock up the frame on a Nerve, or maybe a rendering of one on a Nerve? I'd really like to see how it fits on one. Thanks!

cs900 · 09-09-2010, 08:33 AM

looking good still speed. If I may I'd like to throw out two minor things i've noticed. There is a sharp point on the frame where the trigger gaurd meets the main frame, near the bottom of the tigger. You may want to consider giving that a small radius so people who wear full gloves don't get snagged on the point.

second thing, from the renderings it looks like your trigger will hit the guard as it rotates just a small amount. You may want to shorten the trigger a bit to give it more rotational clearance. some people like a longer travel in their trigger settings.

Of course I could be way off too, but better safe than sorry!

SpeedsCustom-PB · 09-09-2010, 10:00 AM

cs900- Good observations, the trigger guard itself has a radius on both edges, which are not shown in the renderings. So that little corner will have a radius along the entire edge making it "snag free".

As for the trigger, when they are fully machined I will program them to be a hundredth to a few hundredth's smaller. The trigger will be just fine. But viewing the renderings, you can easily make the assumption.

But all these issues are accounted for.

I'll be updating the first post.

Thanks all,

-Jason P.

SpeedsCustom-PB · 09-09-2010, 10:00 AM

Quote:

Originally Posted by greenvertboy

Hey Jason,

Would it be possible for you to mock up the frame on a Nerve, or maybe a rendering of one on a Nerve? I'd really like to see how it fits on one. Thanks!

I'm sure I can custom fit one for you

-Jason

greenvertboy · 09-09-2010, 10:33 AM

I'm not worried if it will fit, I'm really just curious to see how it looks with the snatch and all that jazz at the back of the frame/body. I'm sure it would bolt right on with out any problems, or so I think.

yanks914 · 09-09-2010, 11:02 AM

Wow..could possibly have this frame and the eigenbolt around the same time?

There is a god lol