Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 05-11-2013, 12:34 PM #1
grss429
Gun Tech! & Field owner
 
grss429's Avatar
 
Join Date: Sep 2007
Location: N.C
grss429 plays in the PSP
grss429 posts videos on PbNation
grss429 plays in the APPA D4 division
grss429 has perfected Level 1 in PbNation Pursuit
grss429 has achieved Level 4 in PbNation Pursuit
SFT shocker not firing

Hello so i had a sft was leaking replaced all the orings leak stopped. now once i air it up the bolt gets sucked back. turn board on and pull trigger it chirps but does't fire at all... i have tried different dwells, from all the way up to all the way down.

ive checked zdspb and did this

Replace the battery (common).
Verify that your dwell isn't set too low.
Clean and regrease the firing assembly and solenoid.
Verify that the solenoid endcap is installed correctly. Parker solenoid endcap has a line that must face the body; Humphrey solenoid has a dot that must face away from the body.


last thing it said is check inserts whats a insert? i have a Humphrey solenoid it has a small pin on the endcap
__________________
B'Fins Paintball Tech
My gun repair/cleaning/tech service

BE SURE TO CHECK OUT MY FACEBOOK PAGE! WEBSITE COMING SOON www.facebook.com/bfinpbt

Owner/home field.
Come play at Nature of the game paintball in hampstead North Carolina (910) 270 2163
grss429 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 05-11-2013, 01:49 PM #2
jim4130
proud gmax owner!!!
 
jim4130's Avatar
 
Join Date: Jul 2008
Location: woburn MA.
jim4130 plays in the PSP
jim4130 plays in the APPA D4 division
jim4130 is one of the top 250 posters on PbNation
jim4130 is Boss
The inserts are the 2 screws on the back of the gun below the bolt guide.

So it chirps when you pull the trigger. Did you put paint in to shoot it or turn off the eyes?
__________________
OBE
SBPB

come check out my gun collection

proud suporter of

shocker owners
jim4130 is online now   Reply With Quote
Old 05-11-2013, 02:36 PM #3
grss429
Gun Tech! & Field owner
 
grss429's Avatar
 
Join Date: Sep 2007
Location: N.C
grss429 plays in the PSP
grss429 posts videos on PbNation
grss429 plays in the APPA D4 division
grss429 has perfected Level 1 in PbNation Pursuit
grss429 has achieved Level 4 in PbNation Pursuit
Quote:
Originally Posted by jim4130 View Post
The inserts are the 2 screws on the back of the gun below the bolt guide.

So it chirps when you pull the trigger. Did you put paint in to shoot it or turn off the eyes?
tried both. yes it chirps when i pull trigger. i didnt move the inserts should i check them? the LED on the power button doesnt work either i tried a used board as well both have no led
__________________
B'Fins Paintball Tech
My gun repair/cleaning/tech service

BE SURE TO CHECK OUT MY FACEBOOK PAGE! WEBSITE COMING SOON www.facebook.com/bfinpbt

Owner/home field.
Come play at Nature of the game paintball in hampstead North Carolina (910) 270 2163
grss429 is offline   Reply With Quote
Old 05-11-2013, 05:54 PM #4
jim4130
proud gmax owner!!!
 
jim4130's Avatar
 
Join Date: Jul 2008
Location: woburn MA.
jim4130 plays in the PSP
jim4130 plays in the APPA D4 division
jim4130 is one of the top 250 posters on PbNation
jim4130 is Boss
Check your upper board for screw damage.
__________________
OBE
SBPB

come check out my gun collection

proud suporter of

shocker owners
jim4130 is online now   Reply With Quote
Old 05-11-2013, 06:19 PM #5
zzANGUISHzz
Bad Luck 13
 
zzANGUISHzz's Avatar
 
Join Date: Nov 2012
Location: Philadelphia, PA
Annual Supporting Member
zzANGUISHzz is BST Legit
zzANGUISHzz is playing at Living Legends VII
zzANGUISHzz owns a Planet Eclipse Geo
zzANGUISHzz posts videos on PbNation
zzANGUISHzz supports DLX Technology
zzANGUISHzz supports Empire
If the led on upper board isn't lighting up. Check the wiring harness receiver on both the upper and lower board.

The last pin maybe bent and not inserting into the wiring harness which is preventing the led light from turning on.

If it chirps when you are pressing the trigger that usually means eyes are on and nothing in breech therefore it wouldn't fire but rather just chirp.
zzANGUISHzz is offline   Reply With Quote
Old 05-12-2013, 12:38 PM #6
grss429
Gun Tech! & Field owner
 
grss429's Avatar
 
Join Date: Sep 2007
Location: N.C
grss429 plays in the PSP
grss429 posts videos on PbNation
grss429 plays in the APPA D4 division
grss429 has perfected Level 1 in PbNation Pursuit
grss429 has achieved Level 4 in PbNation Pursuit
Quote:
Originally Posted by zzANGUISHzz View Post
If the led on upper board isn't lighting up. Check the wiring harness receiver on both the upper and lower board.

The last pin maybe bent and not inserting into the wiring harness which is preventing the led light from turning on.

If it chirps when you are pressing the trigger that usually means eyes are on and nothing in breech therefore it wouldn't fire but rather just chirp.
checked still nothing whats next on the list
__________________
B'Fins Paintball Tech
My gun repair/cleaning/tech service

BE SURE TO CHECK OUT MY FACEBOOK PAGE! WEBSITE COMING SOON www.facebook.com/bfinpbt

Owner/home field.
Come play at Nature of the game paintball in hampstead North Carolina (910) 270 2163
grss429 is offline   Reply With Quote
Old 05-13-2013, 11:41 AM #7
grss429
Gun Tech! & Field owner
 
grss429's Avatar
 
Join Date: Sep 2007
Location: N.C
grss429 plays in the PSP
grss429 posts videos on PbNation
grss429 plays in the APPA D4 division
grss429 has perfected Level 1 in PbNation Pursuit
grss429 has achieved Level 4 in PbNation Pursuit
anything?
__________________
B'Fins Paintball Tech
My gun repair/cleaning/tech service

BE SURE TO CHECK OUT MY FACEBOOK PAGE! WEBSITE COMING SOON www.facebook.com/bfinpbt

Owner/home field.
Come play at Nature of the game paintball in hampstead North Carolina (910) 270 2163
grss429 is offline   Reply With Quote
Old 05-13-2013, 12:10 PM #8
jim4130
proud gmax owner!!!
 
jim4130's Avatar
 
Join Date: Jul 2008
Location: woburn MA.
jim4130 plays in the PSP
jim4130 plays in the APPA D4 division
jim4130 is one of the top 250 posters on PbNation
jim4130 is Boss
Take the frame off and reconnect all the electronics power it up and wiggle the wire harness around . If the led comes on replace the harrness.
__________________
OBE
SBPB

come check out my gun collection

proud suporter of

shocker owners
jim4130 is online now   Reply With Quote
Old 05-15-2013, 05:22 PM #9
grss429
Gun Tech! & Field owner
 
grss429's Avatar
 
Join Date: Sep 2007
Location: N.C
grss429 plays in the PSP
grss429 posts videos on PbNation
grss429 plays in the APPA D4 division
grss429 has perfected Level 1 in PbNation Pursuit
grss429 has achieved Level 4 in PbNation Pursuit
Quote:
Originally Posted by jim4130 View Post
Take the frame off and reconnect all the electronics power it up and wiggle the wire harness around . If the led comes on replace the harrness.
Ill do that, would next option be a lower/upper board?
__________________
B'Fins Paintball Tech
My gun repair/cleaning/tech service

BE SURE TO CHECK OUT MY FACEBOOK PAGE! WEBSITE COMING SOON www.facebook.com/bfinpbt

Owner/home field.
Come play at Nature of the game paintball in hampstead North Carolina (910) 270 2163
grss429 is offline   Reply With Quote
Old 05-21-2013, 08:19 PM #10
grss429
Gun Tech! & Field owner
 
grss429's Avatar
 
Join Date: Sep 2007
Location: N.C
grss429 plays in the PSP
grss429 posts videos on PbNation
grss429 plays in the APPA D4 division
grss429 has perfected Level 1 in PbNation Pursuit
grss429 has achieved Level 4 in PbNation Pursuit
Bump
__________________
B'Fins Paintball Tech
My gun repair/cleaning/tech service

BE SURE TO CHECK OUT MY FACEBOOK PAGE! WEBSITE COMING SOON www.facebook.com/bfinpbt

Owner/home field.
Come play at Nature of the game paintball in hampstead North Carolina (910) 270 2163
grss429 is offline   Reply With Quote
Old 05-21-2013, 08:28 PM #11
tyronejk
titular
 
tyronejk's Avatar
 
Join Date: Jan 2012
Location: Atlanta, GA
tyronejk is an NCPA player
tyronejk plays in the APPA beginner division
Did the LED come on after wiggling the wires around?
__________________
Current markers: 2011 G6R | Shocker NXT | Lasoya Promaster | Ion

Theoretical max efficiency of a marker
Automated paintball turret
tyronejk is offline   Reply With Quote
Old 05-21-2013, 08:33 PM #12
kool_aid22
#1 Hater
 
kool_aid22's Avatar
 
Join Date: Sep 2011
Location: Atlanta
kool_aid22 is BST Legit
kool_aid22 is one of the top 1000 posters on PbNation
kool_aid22 is Legendary
kool_aid22 supports Empire
do u have a parker or humphrey noid? replace the upperboard ez if its a humphrey just pop it off. but yeah check all electronic components ie clipped wires, pins bent, receivers ok etc
kool_aid22 is offline   Reply With Quote
Old 05-21-2013, 11:49 PM #13
FuzionF88
Yes..that did just happen
 
FuzionF88's Avatar
 
Join Date: Feb 2008
Location: Cincinnati
FuzionF88 is playing at Living Legends VI
FuzionF88 owns a Planet Eclipse Etek
FuzionF88 supports Team VICIOUS
FuzionF88 posts videos on PbNation
degauss your gun, push the bolt back into the receiver assembly as far as you can, and gas your marker as fast as you can. Dwell it at 14 (factory), turn your abs dwell up an extra 5 milliseconds (if your board supports it) and try it again. It's what I have to do to my techt bolt. I need all new orings on my engine (minus the bolt because it's almost brand new, I purchased it form techt paintball) I am finding that the bolt isn't able to return far enough back into the firing engine in order to completely cycle 100% with my shocker. Basically my bolt aint stirrin the cool aid, however I am getting a bit more efficiency with the techt bolt versus the stocker. I bought a high efficiency can and had super bad bolt stick when I gassed up the marker as the bolt wouldn't go back inside the breech far enough. I swapped it back for the stock firing can, and took both spacers outta my techt bolt using just the spring alone. As long as I push the bolt back before I gas it up, it shoots just fine and dandy, all is hunkey dorey...I've never had a gun act this goofy before but like I said, I'm fairly certain it's my orings and the grease I'm using. Also I'd try to blow out all of the small holes milled into your delrin bolt piece (they might be clogged with excess grease) get yourself compressed air container (or just use a shop air gun if you have a shop tank) and blow out the holes in the delrin piece. Seemed to help get me shooting. Hope I help!!
FuzionF88 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump