[canningpat24]

I have a remote coil quick disconnect WITHOUT a slide check so on videos I've watched is this how i properly connect my co2 to my remote coil and to my marker?
--------------------------------------------------------------------------
Is this how I safely screw my Co2 in and connect it to my remote coil and marker?

1.Connect remote coil to marker
2.Make sure screw on top of where you screw in Co2 is unscrewed
3.Screw in Co2
4.Then screw in screw on top of where you screw in Co2
--------------------------------------------------------------------------
And is this how i disconnect it?

1.Unscrew screw on top of where you screw in Co2
2.Shoot marker to release remaining Co2
3.Unscrew Co2
3.Pull Out Female end out of marker.
--------------------------------------------------------------------------
Just tell me if these are correct or incorrect.

[zea]

o.0 confusing.

connect the co2 to the remote coil
connect the remote coil to the gun
turn on the on/off in the remote.
if the remote dont have a on/off
connect remote to gun
connect co2 to gun.

[invertfan12345]

Originally Posted by zea

o.0 confusing.

connect the co2 to the remote coil
connect the remote coil to the gun
turn on the on/off in the remote.
if the remote dont have a on/off
connect remote to gun
connect co2 to gun.

yes if you dont have a on off make sure you connect the remote line to the gun first

[lostsaint]

Yea you are doing it right from what i can tell just make sure you are in a area with no people when you are dry firing while dissconnecting the bottle.

[NoShaDow]

screw the remote into the gun, then the co2 into the remote, if applies turn remote on/off on

to remove:
if applies turn on/off off, unscrew co2 from remote, unscrew remote from gun, the fun should leak that air over time but you can shoot out the excess at this point

[canningpat24]

Originally Posted by invertfan12345

yes if you dont have a on off make sure you connect the remote line to the gun first

that on/off thing im assuming thats the slide check? thats where you push it forward so co2 can flow and pull it back to cut off the co2 flow. if you are talking about that i do not have one of those