 |
06-08-2010, 03:15 PM
|
#1
|
|
me, my gun, and I
Join Date: May 2009
Location: michigan
|
Creed problem
So i just go a creed and there is a pretty bad leak coming from the body when i air it up, however, i dryfire it a few times and then the leak goes away. If anyone knows how to fix this problem i would really appreciate it, feel free to leave a response here or pm or text me @ 517-294-4976, Erik
__________________
Erik If your a Christian baller, put this in your sig U.S. Army 92F
|
|
|
|
06-08-2010, 03:40 PM
|
#2
|
|
BallsoHard
Join Date: May 2009
Location: Virginia Beach, VA
|
thats not a problem (mine does that when i leave it in the heat for long periods of time) and there is a thread for tech questions.
|
|
|
|
|
06-08-2010, 04:04 PM
|
#3
|
|
Goonz 2011
Join Date: Mar 2010
Location: Ohio
|
hey bro. glad u got a creed. u offered on mine lol! but my teammate had the same problem and i fixed it for him. i reccomend that u go watch martin's tech vids on servicing the creed. my teammates problem was the poppet cuz a lot of lube and grime got on it.
|
|
|
|
|
06-08-2010, 07:05 PM
|
#4
|
|
me, my gun, and I
Join Date: May 2009
Location: michigan
|
Quote:
Originally Posted by Rey Mysterio
thats not a problem (mine does that when i leave it in the heat for long periods of time) and there is a thread for tech questions.
|
Thanks, ill look for the thread.
Quote:
Originally Posted by Thorzie614
hey bro. glad u got a creed. u offered on mine lol! but my teammate had the same problem and i fixed it for him. i reccomend that u go watch martin's tech vids on servicing the creed. my teammates problem was the poppet cuz a lot of lube and grime got on it.
|
Thanks for the advice.
__________________
Erik If your a Christian baller, put this in your sig U.S. Army 92F
|
|
|
|
|
06-08-2010, 11:24 PM
|
#5
|
|
Join Date: Aug 2001
Location: SSM, Ontario, Canada
|
Yup, a common mistake people make when lubing the poppet is getting grease on the sealing edge. That grease causes the cup seal to leak.
The other problem is maybe the previous owner never lubed the poppet, in which case the poppet oring or tiny valve oring have worn out, causing a leak. People forget balanced valves need love. I'd take the whole gun apart and give it a good once over. Change the poppet and valve orings, lube them up and see what happens.
__________________
Creed Battery f/s
Creed Replacement eyes f/s
Creed replacement solenoid f/s
06 alien remains board f/s
|
|
|
|
06-09-2010, 12:36 AM
|
#6
|
|
Macdev Tech Support
|
Per your pm, reset pressures if leaking between the frame on first air up. Poss noid issue.
Back out LPR 1 full turn and fire the marker. IF the air up problem is gone after you re air the marker you could be over pressured. Clean and lube poppet oring, LPR piston and check the shreader valve for being tight.
Eric
|
|
|
|
|
06-09-2010, 10:58 AM
|
#7
|
|
me, my gun, and I
Join Date: May 2009
Location: michigan
|
thanks everyone for your support
__________________
Erik If your a Christian baller, put this in your sig U.S. Army 92F
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
