Originally Posted by Greenmeansg0
check that your detents, eyes and bolt are installed correctly
no eyes on a BT Delta dude. i would take a look at the rip clip setting 1 slow, 2 (where mine is set and i have my egrip set to 13 balls per second ramping) 3 fast as hell. when you turn on the rip clip the light will be a mix of all three colors and flash 1,2 or three times. that indicates what setting you are on. what type of grip do you have? mech -egrip? i also took the rip clip off and smoothed out the breech with some steel wool. the breech is the hole where the paint enters the marker. take a look at the front of the bolt as well. if there are any imperfections you will chop. if the rip clip is messy inside i would think that the paint os crap or the feeder is loading at a ridiculous rate and breaking the paint. i had that happen a couple of times when it got cold and the pait was getting brittle. try a different barrel, that could be a problem too.